What You Need to Know About Carpet Selection
After you have calculated the dimensions of your room, you can move on to planning out the layout of your carpet. The carpet pile’s orientation is the first thing to take note of.
Always keep the carpet running in the same direction; this is one of the most important carpet rules. No pieces can be switched in a lateral fashion. Doing so will cause the two items’ appearances to be drastically different from one another, perhaps even to the point of appearing to be different colors.
You may need to buy more carpet than you think you’ll need so that it all runs in the same direction. Think about it: a hallway, 3 feet wide and 12 feet long, enters a room, also 12 feet wide and 9 feet long, forming a T shape.
If you can only find carpet in a 12′ width, the smallest room you can fit it into would require a piece of carpet 12′ by 9′, while the smallest piece of carpet you could get for the hallway would be 12′ by 3′. However, this would necessitate turning the 12′ by 3′ hallway carpet on its side.
You can handle the situation described there in one of two ways, but only one of them will maximize your carpet’s effectiveness.
Option 1: The best way to lay the carpet is to buy a 12′ by 9′ piece for the room and another 12′ by 12′ for the hallway. There are far too many carpets included in the package for your needs. Still, doing it this way keeps the carpet headed in the right direction and improves its performance in the hall. The carpet’s fibers must face the foot traffic. Carpets wear down faster when people walk on them repeatedly in a direction opposite to the pile’s natural direction or the grain. As seen in the image up top, this is one possible alternative.
Alternate 2: Obtain a 12′ by 12′ for the location, and a 12′ by 3′ for the assembly hall. As you’d only be left with 3′ by 12′ of unused carpet, as opposed to 9′ by 12′ in the first option, this would certainly result in much less waste (i.e., carpet that is not utilized).
Option 1 is preferable because the carpet will hold up better in the corridor, but it costs more and leaves a lot of extra carpets. However, Option 2 could be considered for lower website traffic homes, or for a more inexpensive setup. In addition, depending on the layout, Option 2 may be necessary when carpeting the stairs that lead off the hallway. This is because a formed carpet must be kept straight as it reviews the edge of the stairs.
Both of these approaches to carpet installation will keep the carpet free of seams in the hall’s most heavily traveled spots. And hopefully, you can find a use for the leftovers; perhaps you’ll also carpet your stairs and can use the scraps for that. Make a rug or runner out of the scraps of carpet.
The complexity of estimating carpet needs depends on factors such as the area to be carpeted. Having a professional on hand to do the measuring and calculating is highly recommended if you have an unusual layout, are working with a pattern match, or are planning to carpet multiple areas of your home. Professionals will be aware of where to look and may even point out the elimination of certain possibilities, such as the location of joints, that you overlooked.
The same holds true for carpet cleaning; after installation, you should only have professional cleaners maintain and clean your carpets. Professional carpet cleaners, such as Green Carpet’s Cleaning, have the expertise and equipment to clean your carpets thoroughly and extend their useful life. We offer expert Carpet Cleaning Near Me Benicia service.
