What Is The Best Way To Clean A Rug?
Area rugs are a excellent way to add warmth and personality to your decoration, but after prolonged use, they will need a good cleaning to look like brand new. For many contemporary rugs, cleaning can be a once-a-year DIY job which saves you the cost of professional cleaning. If your rug is labeled with specific cleaning instructions, follow those. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug and general rug maintenance tips.
Generally, area rugs just have to be deep cleaned annually. Here are a Couple of ways to determine If It’s time for Rug Cleaning in Wilmington:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a few basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Try to pick a time to clean your rugs when there is going to be three or four sunny, hot days together. It could be a lot easier to clean your rugs outdoors, and sun and warm air will help them dry more quickly and thoroughly. Plus, the sun is a natural and effective deodorizer, which will keep most of the dirt and dust from the house. If an outside area is not accessible, use any floor area that moisture won’t damage (like concrete or vinyl flooring in the kitchen or kitchen.)
Shake or conquer Take smaller rugs and darkened rugs outside and provide them a good shake to release loose dust and dirt. If the rug is large, request a spouse for help to hang the rug above a porch rail or over a couple of solid chairs. Do not forget to shake out the rug mat also.
Fill another bucket with clean water.
Examine the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be examined for colorfastness to prevent harm. Dab the cleaning solution on a small corner of this rug with a white towel. Allow the test spot dry thoroughly, then check again to make certain colours haven’t bled or faded.
Scrub, if necessary: When the rug is colorfast, put on the soap solution to the rug with a soft-bristle brush or sponge. Start at one end of this rug. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–only use as much as needed. Use gentle pressure to gently scrub the rug. Work in a 3- from 3-foot location. Rinse out the sponge/brush regularly so the dirt will not be transferred.
Scrub the rug thoroughly: It is important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and then remove any soap from the region just cleaned.
Blot: Drive as much excess water as possible using a squeegee and moving from the path of the rug nap. Utilize the towels to absorb any excess moisture. Scrub, rinse and blot a place before going into the next.
Allow the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote greater air flow and assist the rug dry more completely.
Adjust rug fibers: When the rug has dried completely, lightly go over the rug using a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it may be well worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions on the best way to operate the machine.
Check related blogs about Rug Cleaning:
Is It Worth Getting Carpets Professionally Cleaned in Wilmington
