What Is The Ideal Way To Clean A Rug?
Area rugs are a excellent way to add warmth and character to your decoration, but after prolonged use, they will require a good cleaning to look like brand new. For many modern rugs, cleaning may be a once-a-year DIY project that saves you the expense of specialist cleaning. If your rug is labeled with specific cleaning instructions, follow those.
In general, area rugs only need to be deep cleaned yearly. Listed below are a few ways to determine if it is time for Rug Cleaning in West Covina:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s label. Try to select a time to clean your rugs when there will be three or four glowing, hot days together. It could be a lot easier to clean your rugs outside, and sun and warm air will help them dry faster and thoroughly. Plus, the sun is a natural and effective deodorizer, which will keep most of the dust and dirt from the house. Whether an outside area isn’t available, use any floor area which moisture won’t damage (like vinyl or concrete flooring in the kitchen or kitchen.)
Shake or beat: Take smaller rugs and darkened rugs outside and provide them a good shake to release loose dust and dirt. If the rug is large, ask a partner for assistance to hang the rug over a porch railing or over a couple solid chairs. Don’t forget to shake out the rug pad too.
Mix the cleaner: Create a cleaning solution as directed by your chosen rug shampoo, or mix two to three teaspoons of mild dish soap into among those 5-gallon buckets with warm water.
Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it needs to be tested for colorfastness to avoid damage. Dab the cleaning solution on a small corner of this rug with a towel. Let the test place dry thoroughly, then check again to make sure colours haven’t bled or faded.
Scrub, if needed: If the rug is colorfast, put on the soap solution to the rug using a soft-bristle brush or sponge. Start at one end of the rug. Dip the sponge/brush into the cleaning solution. Do not over-wet the fibers–just use as much as required. Use gentle pressure to lightly scrub the rug. Function in a 3- by 3-foot area. Rinse out the sponge/brush frequently so the dirt will not be transferred.
Rinse the rug thoroughly: It is important not to leave any soap substance on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and remove any soap from the region just cleaned.
Blot: Push out as much excess water as possible using a squeegee and moving in the path of the rug nap. Scrub, rinse and blot an area before moving into the next.
Dry: Hang up the rug to dry, or put the rug level, face-up and prop the underside with risers to allow for air flow. Allow the rug dry completely before bringing it back indoors, rotating it periodically to promote even drying. Once inside, turn on fans to promote greater air circulation and assist the rug dry completely.
Adjust rug fibers: When the rug has dried thoroughly, lightly examine the rug using a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is very soiled, it could be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions on how to run the machine.
Check related blogs about Rug Cleaning:
How to Clean a Rug in West Covina
