Green Carpets Cleaning


What’s The Ideal Way To Clean A Rug?

Area rugs are a great way to add warmth and personality to your decoration, but after prolonged use, they will need a good cleaning to look like new. For most modern rugs, cleaning can be a once-a-year DIY project that saves you the cost of professional cleaning. If your rug is labeled with particular cleaning instructions, follow those. Otherwise, use this manual from Green Carpet’s Rug Cleaning to learn how to clean a rug along with basic rug maintenance hints.

Generally, area rugs just have to be deep cleaned annually. Here are a Couple of ways to Find out if it is time for Rug Cleaning in Temple City:

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug just requires a few basic tools. You may need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Try to pick a time to clean your rugs when there will be a few glowing, hot days together. It may be a lot easier to clean your rugs outdoors, and sun and warm atmosphere will help them dry faster and thoroughly. Additionally, the sunlight is a natural and effective deodorizer, which will keep most of the dust and dirt from the house. Whether an outdoor area isn’t available, use any floor area that moisture won’t damage (like vinyl or concrete flooring in the kitchen or garage.)

Shake or conquer Take smaller rugs and darkened rugs outdoors and give them a good shake to discharge loose dirt and dust. If the rug is large, request a partner for help to hang the rug over a porch railing or over a couple solid chairs. Do not forget to shake the rug pad too.

Mix the cleaner: Make a cleaning solution as directed by your chosen rug shampoo, or mix two to three teaspoons of mild dish soap into among those 5-gallon buckets with warm water. Fill another bucket with clean water.

Test the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it needs to be examined for colorfastness to prevent harm. Dab the cleaning solution on a small corner of this rug with a towel. Let the test spot dry completely, then check again to make certain colours have not bled or faded.

Scrub, if necessary: If the rug is colorfast, apply the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush to the cleaning solution. Do not over-wet the fibers–only use as much as required. Work in a 3- by 3-foot location. Rinse out the sponge/brush frequently so the dirt will not be transferred.

Rinse the rug completely: It’s important not to leave any soap substance on the rug. Dip a clean sponge at the rinse water and remove any soap in the area just cleaned.

Blot: Drive as much excess water as possible with a squeegee and moving from the path of this rug nap. Scrub, rinse and blot a place before going to the next.

Let the rug dry completely prior to bringing it back indoors, rotating it periodically to promote even drying. Once inside, turn on fans to encourage greater air flow and help the rug dry completely.

Adjust rug fibers: Once the rug has dried thoroughly, lightly go over the rug using a vacuum or a soft-bristle brush to Blend the fibers.

Steam cleaners: If your rug is extremely soiled, it could be well worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the company’s instructions on the best way to operate the machine.

Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Temple City
What Type Of Rug Is Easiest To Keep Clean in Temple City

Scroll to Top