Area rugs are a excellent way to add warmth and personality to your decoration, but after prolonged use, they will need a good cleaning to seem like new. For many modern rugs, cleaning may be a once-a-year DIY job which saves you the cost of specialist cleaning. If your rug is labeled with particular cleaning instructions, follow those.

In general, area rugs only have to be deep cleaned yearly. Listed below are a Couple of ways to Find out If It’s time for Rug Cleaning in Simi Valley:

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug only requires a few basic tools. You may need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Try to select a time to clean your rugs if there will be three or four sunny, hot days together. It may be easier to clean your rugs outdoors, and sun and warm air will help them dry faster and thoroughly. Plus, the sun is a natural and effective deodorizer, which will keep most of the dust and dirt out of the home. Whether an outside area isn’t accessible, use any floor area that moisture won’t damage (like concrete or vinyl floor in the kitchen or kitchen.)

Shake or beat: Take smaller rugs and medium-sized rugs outdoors and give them a fantastic shake to discharge loose dirt and dust. If the rug is large, ask a partner for assistance to hang the rug over a porch railing or above a couple solid chairs. Use a broom or rug beater to reach the rug around to loosen deeply embedded dirt. Do not forget to shake out the rug mat also.

Fill the other bucket with clean water.

Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it should be tested for colorfastness to avoid damage. Dab the cleaning solution on a small corner of this rug with a white towel. Check to see whether any color transfers to the towel. Let the test place dry completely, then check again to make certain colors have not bled or faded.

Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–just use as much as needed. Function in a 3- from 3-foot area. Rinse out the sponge/brush frequently so the dirt will not be transferred.

Scrub the rug thoroughly: It’s important not to leave any soap substance on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and remove any soap from the region just cleaned.

Blot: Push out as much excess water as you can with a squeegee and moving from the path of this rug nap. Scrub, rinse and blot an area before going to the next.

Allow the rug dry completely before bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to encourage more air circulation and assist the rug dry completely.

Adjust rug fibers: Once the rug has dried completely, lightly go over the rug using a vacuum or a soft-bristle brush to Blend the fibers.

Steam cleaners: If your rug is very soiled, it could be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions about the best way to run the machine.

Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Simi Valley
What Type Of Rug Is Easiest To Keep Clean in Simi Valley