What Is The Best Way To Clean A Rug in Pomona



Area rugs are a great way to add warmth and character to your decoration, but after prolonged use, they will need a good cleaning to seem like brand new. For most contemporary rugs, cleaning may be a once-a-year DIY job which saves you the expense of specialist cleaning. If your rug is labeled with specific cleaning instructions, follow those.

Generally, area rugs only need to be deep cleaned yearly. Listed below are a few ways to Find out If It’s time for Rug Cleaning in Pomona:

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug only requires a few basic tools. You will need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Before cleaning a rug, read the care instructions on the rug’s label. Try to select a time to clean your rugs if there will be a few sunny, hot days together. It could be a lot easier to clean your rugs outside, and sunshine and warm atmosphere will help them dry more quickly and thoroughly. Additionally, the sunlight is a natural and effective deodorizer and this will keep most of the dirt and dust from the home. If an outdoor area isn’t available, use any floor area that moisture won’t damage (like concrete or vinyl flooring in the kitchen or garage.)

Shake or beat: Require smaller rugs and medium-sized rugs outside and give them a fantastic shake to discharge loose dirt and dust. If the rug is large, request a partner for assistance to hang the rug over a porch rail or over a couple solid chairs. Do not forget to shake the rug pad too.

Test the rug for colorfastness: Prior to cleaning a rug with any type of solution, it should be tested for colorfastness to avoid damage. Dab the cleaning solution on a small corner of this rug with a white towel. Check to find out whether any color transfers to the towel. Let the test spot dry thoroughly, then check again to make certain colors have not bled or faded.

Scrub, if necessary: If the rug is colorfast, apply the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush to the cleaning solution. Don’t over-wet the fibers–just use as much as needed. Work in a 3- by 3-foot location. Rinse the sponge/brush regularly so the dirt will not be transferred.

Rinse the rug thoroughly: It’s important not to leave any soap substance on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and remove any soap from the region just cleaned.

Blot: Push out as much excess water as you can using a squeegee and moving in the path of the rug nap. Scrub, rinse and blot an area before going into the next.

Allow the rug dry thoroughly before bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote greater air circulation and help the rug dry completely.

Adjust rug fibers: When the rug has dried thoroughly, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.

Steam cleaners: If your rug is extremely soiled, it may be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions about how to operate the machine.

Check related blogs about Rug Cleaning:
Should I Take My Rug To My Dry Cleaner in Pomona
Why You Need To Buy A Rug in Pomona