What Is The Best Way To Clean A Rug in Oak Park

Area rugs are a excellent way to add warmth and personality to your decor, but after prolonged use, they will require a fantastic cleaning to look like brand new. For many modern rugs, cleaning may be a once-a-year DIY job that saves you the expense of specialist cleaning. If your rug is labeled with particular cleaning instructions, follow these. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug and general rug maintenance hints.

Generally, area rugs only have to be deep cleaned yearly. Here are a Couple of ways to determine If It’s time for Rug Cleaning in Oak Park :

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug only requires a couple of basic tools. You may need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Before cleaning a rug, read the care instructions on the rug’s label. Try to select a time to clean your rugs if there will be a few glowing, hot days together. It may be easier to clean your rugs outside, and sunshine and warm air will help them dry more quickly and thoroughly. Additionally, the sunlight is a natural and effective deodorizer and this will keep most of the dust and dirt out of the home. If an outside area isn’t available, use any floor area that moisture will not damage (like concrete or vinyl floor in the kitchen or garage.)

Shake or beat: Take smaller rugs and medium-sized rugs outside and give them a good shake to discharge loose dirt and dust. If the rug is large, ask a spouse for help to hang the rug above a porch railing or above a couple of solid chairs. Use a broom or rug beater to hit on the rug all over to loosen deeply embedded dirt. Don’t forget to shake out the rug pad too.

Fill another bucket with clean water.

Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it needs to be tested for colorfastness to prevent harm. Dab the cleaning solution on a small corner of the rug with a towel. Check to see if any color transfers to the towel. Allow the test place dry completely, then check again to make certain colors haven’t bled or faded.

Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–only use as much as needed. Function in a 3- from 3-foot area. Rinse the sponge/brush regularly so the dirt won’t be transferred.

Scrub the rug completely: It is important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and then remove any soap from the area just cleaned.

Blot: Push out as much excess water as possible using a squeegee and moving from the direction of this rug nap. Scrub, rinse and blot a place before going into the next.

Dry: Hang up the rug to dry, or put the rug flat, face-up and prop the bottom with risers to allow for air flow. Let the rug dry completely before bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote greater air circulation and assist the rug dry more completely.

Adjust rug fibers: Once the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to Blend the fibers.

Steam cleaners: If your rug is extremely soiled, it could be well worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions on how to run the machine.