What’s The Ideal Way To Clean A Rug?
Area rugs are a great way to add warmth and character to your decoration, but after prolonged use, they will need a fantastic cleaning to look like brand new. For most modern rugs, cleaning can be a once-a-year DIY project that saves you the cost of professional cleaning. If your rug is tagged with particular cleaning instructions, follow these.
In general, area rugs just have to be deep cleaned annually. Here are a few ways to determine if it is time for Rug Cleaning in Moorpark:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a few basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Try to pick a time to clean your rugs when there is going to be a few sunny, hot days together. It may be a lot easier to clean your rugs outside, and sun and warm air will help them dry faster and thoroughly. Additionally, the sun is a natural and effective deodorizer and this will keep the majority of the dirt and dust from the house. If an outside area is not accessible, use any floor area that moisture will not damage (like vinyl or concrete flooring in the kitchen or kitchen.)
Shake or beat: Require smaller rugs and darkened rugs outdoors and provide them a fantastic shake to discharge loose dust and dirt. If the rug is large, ask a partner for help to hang the rug over a porch rail or over a couple solid chairs. Do not forget to shake out the rug pad too.
Mix the cleaner: Create a cleaning solution as directed by your chosen rug shampoo, or blend two to three teaspoons of mild dish soap to one of those 5-gallon buckets with warm water.
Examine the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be examined for colorfastness to prevent damage. Dab the cleaning solution on a small corner of the rug with a towel. Let the test spot dry thoroughly, then check again to make certain colours have not bled or faded.
Scrub, if needed: When the rug is colorfast, apply the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush into the cleaning solution. Do not over-wet the fibers–just use as much as needed. Use gentle pressure to lightly scrub the rug. Function in a 3- from 3-foot location. Rinse the sponge/brush regularly so the dirt won’t be transferred.
Rinse the rug completely: It’s important not to leave any soap substance on the rug. Dip a clean sponge at the rinse water and then remove any soap in the region just cleaned.
Blot: Push out as much excess water as possible using a squeegee and moving in the direction of this rug nap. Use the towels to absorb any excess moisture. Scrub, rinse and blot a place before moving into the next.
Dry: Hang up the rug to dry, or lay the rug level, face-up and prop the underside with risers to permit for air circulation. Allow the rug dry thoroughly prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote more air circulation and assist the rug dry completely.
Adjust rug fibers: When the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it could be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions about how best to run the machine.
Check related blogs about Rug Cleaning:
Should I Take My Rug To My Dry Cleaner in Moorpark
Why You Need To Buy A Rug in Moorpark