Area rugs are a great way to add warmth and character to your decoration, but after prolonged use, they will require a good cleaning to seem like new. For most contemporary rugs, cleaning may be a once-a-year DIY project which saves you the expense of specialist cleaning. If your rug is labeled with particular cleaning instructions, follow those.
Generally, area rugs just need to be deep cleaned yearly. Listed below are a Couple of ways to Find out If It’s time for Rug Cleaning in Menlo Park:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a few basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s label. Try to pick a time to clean your rugs when there will be a few glowing, hot days together. It may be a lot easier to clean your rugs outdoors, and sun and warm air will help them dry faster and thoroughly. Plus, the sun is a natural and effective deodorizer and this will keep most of the dirt and dust out of the house. If an outside area is not accessible, use any floor area that moisture won’t damage (like concrete or vinyl flooring in the kitchen or kitchen.)
Shake or beat: Take smaller rugs and medium-sized rugs outside and give them a good shake to release loose dirt and dust. If the rug is large, ask a partner for help to hang the rug over a porch railing or above a couple of solid chairs. Do not forget to shake out the rug mat also.
Mix the cleaner: Create a cleaning solution as instructed by your preferred rug shampoo, or mix two to three teaspoons of mild dish soap to among the 5-gallon buckets with warm water. Fill the other bucket with clean water.
Examine the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be tested for colorfastness to prevent damage. Dab the cleaning solution on a small corner of the rug with a towel. Check to see if any color transfers to the towel. Let the test place dry thoroughly, then check again to make certain colors have not bled or faded.
Scrub, if needed: When the rug is colorfast, apply the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–just use as much as required. Use gentle pressure to lightly scrub the rug. Function in a 3- by 3-foot area. Rinse out the sponge/brush frequently so the dirt will not be transferred.
Scrub the rug thoroughly: It’s important not to leave any soap material on the rug. Dip a clean sponge at the rinse water and remove any soap in the region just cleaned.
Blot: Drive as much excess water as possible with a squeegee and moving in the path of this rug nap. Scrub, rinse and blot an area before moving to the next.
Allow the rug dry thoroughly prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to encourage greater air circulation and assist the rug dry more completely.
Adjust rug fibers: Once the rug has dried thoroughly, lightly examine the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it could be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the company’s instructions on the best way to run the machine.
Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Menlo Park
Why You Need To Buy A Rug in Menlo Park
