What’s The Ideal Way To Clean A Rug?
Area rugs are a great way to add warmth and character to your decor, but after prolonged use, they will require a fantastic cleaning to seem like brand new. For many contemporary rugs, cleaning can be a once-a-year DIY project which saves you the expense of specialist cleaning. If your rug is labeled with particular cleaning instructions, follow these.
In general, area rugs only have to be deep cleaned annually. Here are a few ways to determine If It’s time for Rug Cleaning in La Mirada:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Prior to cleaning a rug, read the care instructions on the rug’s tag. Try to select a time to clean your rugs if there will be a few glowing, hot days together. It could be easier to clean your rugs outside, and sunshine and warm air will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer and this will keep most of the dust and dirt out of the home. If an outside area isn’t accessible, use any floor area that moisture will not damage (like concrete or vinyl flooring in the kitchen or kitchen.)
Shake or conquer Require smaller rugs and medium-sized rugs outside and give them a good shake to release loose dust and dirt. If the rug is large, ask a spouse for help to hang the rug above a porch rail or above a couple solid chairs. Do not forget to shake out the rug pad too.
Fill the other bucket with clean water.
Examine the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be tested for colorfastness to prevent damage. Dab the cleaning solution on a tiny corner of this rug with a white towel. Check to see if any color transfers to the towel. Allow the test spot dry completely, then check again to make sure colours haven’t bled or faded.
Scrub, if needed: If the rug is colorfast, put on the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–just use as much as needed. Function in a 3- by 3-foot area. Rinse out the sponge/brush regularly so the dirt will not be transferred.
Rinse the rug thoroughly: It is important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and then remove any soap in the region just cleaned.
Blot: Push out as much excess water as possible with a squeegee and moving in the path of this rug nap. Scrub, rinse and blot an area before going to the next.
Dry: Hang up the rug to dry, or put the rug flat, face-up and prop the bottom with risers to allow for air flow. Allow the rug dry completely prior to bringing it back inside, rotating it occasionally to promote even drying. Once inside, turn on fans to promote more air flow and help the rug dry more completely.
Adjust rug fibers: Once the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it may be well worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions about the best way best to run the machine.
Check related blogs about Rug Cleaning:
Is It Worth Getting Carpets Professionally Cleaned in La Mirada
