What’s The Ideal Way To Clean A Rug?
Area rugs are a great way to add warmth and personality to your decoration, but after prolonged use, they will require a good cleaning to look like brand new. For many modern rugs, cleaning may be a once-a-year DIY project which saves you the cost of professional cleaning. If your rug is tagged with specific cleaning instructions, follow these. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug and general rug maintenance hints.
In general, area rugs just need to be deep cleaned annually. Listed below are a few ways to determine If It’s time for Rug Cleaning in La Conchita:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a few basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Try to pick a time to clean your rugs if there is going to be a few glowing, hot days together. It may be a lot easier to clean your rugs outside, and sun and warm atmosphere will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer and this will keep the majority of the dirt and dust from the home. Whether an outdoor area is not accessible, use any floor area that moisture won’t damage (like concrete or vinyl floor in the kitchen or garage.)
Shake or beat: Take smaller rugs and medium-sized rugs outdoors and provide them a fantastic shake to release loose dust and dirt. If the rug is large, ask a spouse for assistance to hang the rug over a porch rail or over a couple of solid chairs. Don’t forget to shake out the rug mat also.
Fill another bucket with clean water.
Test the rug for colorfastness: Before cleaning a rug with any type of solution, it should be examined for colorfastness to avoid harm. Dab the cleaning solution on a small corner of the rug with a white towel. Check to find out if any color transfers to the towel. Allow the test spot dry completely, then check again to make certain colors have not bled or faded.
Scrub, if necessary: If the rug is colorfast, put on the soap solution to the rug using a soft-bristle brush or sponge. Start at one end of the rug. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–just use as much as needed. Use gentle pressure to lightly scrub the rug. Work in a 3- by 3-foot area. Rinse the sponge/brush frequently so the dirt will not be transferred.
Rinse the rug completely: It’s important not to leave any soap material on the rug. Soap will attract more dirt. Dip a clean sponge at the rinse water and remove any soap from the region just cleaned.
Blot: Drive as much excess water as you can using a squeegee and moving in the direction of this rug nap. Scrub, rinse and blot an area before moving into the next.
Dry: Hang up the rug to dry, or lay the rug flat, face-up and prop the bottom with risers to permit for air circulation. Let the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to encourage greater air circulation and help the rug dry completely.
Adjust rug fibers: When the rug has dried thoroughly, lightly go over the rug using a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is extremely soiled, it could be well worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions on how best to run the machine.
Check related blogs about Rug Cleaning:
How Much Does It Cost To Dry Clean A Rug in La Conchita