What’s The Best Way To Clean A Rug?
Area rugs are a excellent way to add warmth and character to your decor, but after prolonged use, they will require a good cleaning to look like brand new. For most contemporary rugs, cleaning can be a once-a-year DIY job that saves you the cost of specialist cleaning. If your rug is tagged with specific cleaning instructions, follow those.
Generally, area rugs only have to be deep cleaned yearly. Listed below are a few ways to determine if it is time for Rug Cleaning in Healdsburg:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a few basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s label. Try to pick a time to clean your rugs when there is going to be three or four glowing, hot days together. It may be easier to clean your rugs outside, and sun and warm air will help them dry more quickly and thoroughly. Plus, the sun is a natural and effective deodorizer, which will keep the majority of the dirt and dust from the home. Whether an outside area is not accessible, use any floor area that moisture won’t damage (like concrete or vinyl flooring in the kitchen or garage.)
Shake or beat: Take smaller rugs and medium-sized rugs outside and provide them a fantastic shake to release loose dust and dirt. If the rug is large, request a spouse for help to hang the rug above a porch rail or above a couple solid chairs. Don’t forget to shake the rug pad too.
Fill the other bucket with clean water.
Test the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be examined for colorfastness to prevent damage. Dab the cleaning solution on a tiny corner of the rug with a towel. Check to see whether any color transfers to the towel. Allow the test spot dry completely, then check again to make certain colours have not bled or faded.
Start at one end of this rug. Dip the sponge/brush to the cleaning solution. Do not over-wet the fibers–just use as much as needed. Function in a 3- from 3-foot area. Rinse the sponge/brush regularly so the dirt will not be transferred.
Scrub the rug thoroughly: It’s important not to leave any soap material on the rug. Soap will attract more dirt. Dip a clean sponge at the rinse water and then remove any soap in the area just cleaned.
Blot: Drive as much excess water as you can with a squeegee and moving from the path of this rug nap. Scrub, rinse and blot an area before going to the next.
Dry: Hang up the rug to dry, or lay the rug flat, face-up and prop the underside with risers to permit for air flow. Let the rug dry thoroughly prior to bringing it back indoors, rotating it periodically to promote even drying. Once inside, turn on fans to promote more air flow and help the rug dry completely.
Adjust rug fibers: When the rug has dried completely, lightly examine the rug using a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is extremely soiled, it may be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s instructions on the best way best to run the machine.
Check related blogs about Rug Cleaning:
Is It Worth Getting Carpets Professionally Cleaned in Healdsburg
