Area rugs are a excellent way to add warmth and character to your decor, but after prolonged use, they will require a good cleaning to seem like brand new. For most contemporary rugs, cleaning can be a once-a-year DIY job which saves you the expense of professional cleaning. If your rug is tagged with particular cleaning instructions, follow these.

In general, area rugs only have to be deep cleaned annually. Here are a few ways to Find out if it is time for Rug Cleaning in East Palo Alto:

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug only requires a few basic tools. You may need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Try to pick a time to clean your rugs when there will be three or four sunny, hot days together. It may be a lot easier to clean your rugs outside, and sunshine and warm air will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer, which will keep the majority of the dust and dirt from the house. If an outside area isn’t accessible, use any floor area which moisture will not damage (like vinyl or concrete floor in the kitchen or kitchen.)

Shake or beat: Require smaller rugs and medium-sized rugs outdoors and give them a fantastic shake to release loose dirt and dust. If the rug is large, request a spouse for help to hang the rug above a porch railing or over a couple solid chairs. Use a broom or rug beater to reach on the rug around to loosen deeply embedded dirt. Do not forget to shake the rug mat also.

Fill the other bucket with clean water.

Examine the rug for colorfastness: Before cleaning a rug with any kind of solution, it should be examined for colorfastness to avoid damage. Dab the cleaning solution on a small corner of this rug with a towel. Let the test spot dry completely, then check again to make sure colors haven’t bled or faded.

Scrub, if necessary: When the rug is colorfast, put on the soap solution to the rug with a soft-bristle brush or sponge. Dip the sponge/brush to the cleaning solution. Don’t over-wet the fibers–only use as much as required. Use gentle pressure to gently scrub the rug. Function in a 3- from 3-foot location. Rinse the sponge/brush regularly so the dirt won’t be transferred.

Scrub the rug completely: It’s important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and remove any soap in the area just cleaned.

Blot: Push out as much excess water as possible using a squeegee and moving from the path of the rug nap. Scrub, rinse and blot a place before going to the next.

Allow the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote more air flow and assist the rug dry more completely.

Adjust rug fibers: Once the rug has dried completely, lightly examine the rug with a vacuum or a soft-bristle brush to refresh the fibers.

Steam cleaners: If your rug is extremely soiled, it may be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions on how best to run the machine.

Check related blogs about Rug Cleaning:
Exactly How A Rug Can Make Your Room Perfect in East Palo Alto