Area rugs are a great way to add warmth and character to your decoration, but after prolonged use, they will need a good cleaning to seem like new. For many contemporary rugs, cleaning may be a once-a-year DIY project that saves you the expense of specialist cleaning. If your rug is tagged with particular cleaning instructions, follow these. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug along with general rug maintenance tips.
Generally, area rugs just need to be deep cleaned yearly. Listed below are a few ways to Find out If It’s time for Rug Cleaning in Dodgertown:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Try to pick a time to clean your rugs if there will be a few sunny, hot days together. It may be a lot easier to clean your rugs outside, and sunshine and warm air will help them dry faster and thoroughly. Plus, the sunlight is a natural and effective deodorizer, which will keep most of the dust and dirt from the house. Whether an outdoor area is not accessible, use any floor area which moisture won’t damage (like concrete or vinyl flooring in the kitchen or garage.)
Shake or conquer Require smaller rugs and darkened rugs outside and give them a fantastic shake to release loose dirt and dust. If the rug is large, request a spouse for help to hang the rug above a porch rail or over a couple solid chairs. Use a broom or rug beater to hit on the rug around to loosen deeply embedded dirt. Don’t forget to shake out the rug pad too.
Examine the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be tested for colorfastness to prevent damage. Dab the cleaning solution on a tiny corner of the rug with a towel. Allow the test place dry thoroughly, then check again to make certain colors have not bled or faded.
Dip the sponge/brush to the cleaning solution. Do not over-wet the fibers–only use as much as needed. Function in a 3- by 3-foot location. Rinse out the sponge/brush regularly so the dirt will not be transferred.
Scrub the rug thoroughly: It’s important not to leave any soap substance on the rug. Dip a clean sponge in the rinse water and remove any soap from the region just cleaned.
Blot: Push out as much excess water as you can using a squeegee and moving in the direction of this rug nap. Scrub, rinse and blot an area before moving to the next.
Allow the rug dry thoroughly before bringing it back inside, rotating it periodically to promote even drying. Once inside, turn on fans to encourage more air flow and help the rug dry completely.
Adjust rug fibers: When the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it could be well worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the company’s instructions about how to operate the machine.
Check related blogs about Rug Cleaning:
How to Clean a Rug in Dodgertown
What Type Of Rug Is Easiest To Keep Clean in Dodgertown
