What Is The Best Way To Clean A Rug?
Area rugs are a great way to add warmth and personality to your decor, but after prolonged use, they will need a fantastic cleaning to seem like brand new. For many contemporary rugs, cleaning can be a once-a-year DIY job which saves you the expense of specialist cleaning. If your rug is tagged with specific cleaning instructions, follow these.
Generally, area rugs just need to be deep cleaned yearly. Here are a Couple of ways to Find out if it is time for Rug Cleaning in Diamond Bar:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Prior to cleaning a rug, read the care instructions on the rug’s label. Try to select a time to clean your rugs if there is going to be three or four glowing, hot days together. It may be easier to clean your rugs outdoors, and sunshine and warm atmosphere will help them dry faster and thoroughly. Additionally, the sun is a natural and effective deodorizer, which will keep the majority of the dust and dirt from the house. If an outdoor area is not accessible, use any floor area that moisture will not damage (like vinyl or concrete floor in the kitchen or kitchen.)
Shake or conquer Require smaller rugs and darkened rugs outdoors and provide them a good shake to release loose dirt and dust. If the rug is large, request a partner for help to hang the rug above a porch rail or above a couple solid chairs. Use a broom or rug beater to reach the rug all over to loosen deeply embedded dirt. Don’t forget to shake the rug mat also.
Mix the cleaner: Make a cleaning solution as instructed by your chosen rug shampoo, or mix two to three teaspoons of mild dish soap into one of the 5-gallon buckets with warm water. Fill another bucket with clean water.
Test the rug for colorfastness: Before cleaning a rug with any kind of solution, it should be tested for colorfastness to avoid damage. Dab the cleaning solution on a small corner of the rug with a towel. Check to see if any color transfers to the towel. Let the test place dry thoroughly, then check again to make sure colours have not bled or faded.
Dip the sponge/brush into the cleaning solution. Do not over-wet the fibers–only use as much as needed. Work in a 3- by 3-foot location. Rinse out the sponge/brush regularly so the dirt won’t be transferred.
Rinse the rug completely: It’s important not to leave any soap material on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and remove any soap in the area just cleaned.
Blot: Push out as much excess water as you can with a squeegee and moving from the direction of the rug nap. Scrub, rinse and blot an area before going to the next.
Dry: Hang up the rug to dry, or lay the rug level, face-up and prop the bottom with risers to allow for air flow. Allow the rug dry thoroughly prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to encourage more air flow and assist the rug dry more completely.
Adjust rug fibers: Once the rug has dried completely, lightly go over the rug using a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is extremely soiled, it could be well worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions on how best to run the machine.