Area rugs are a excellent way to add warmth and personality to your decor, but after prolonged use, they will need a fantastic cleaning to seem like brand new. For many contemporary rugs, cleaning may be a once-a-year DIY job that saves you the expense of professional cleaning. If your rug is tagged with specific cleaning instructions, follow these.
Generally, area rugs only have to be deep cleaned yearly. Here are a Couple of ways to determine if it is time for Rug Cleaning in Carson:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Try to pick a time to clean your rugs if there will be three or four glowing, hot days together. It may be easier to clean your rugs outside, and sunshine and warm air will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer and this will keep the majority of the dirt and dust out of the house. Whether an outside area isn’t accessible, use any floor area that moisture will not damage (like vinyl or concrete floor in the kitchen or kitchen.)
Shake or beat: Require smaller rugs and darkened rugs outside and give them a good shake to discharge loose dirt and dust. If the rug is large, request a spouse for assistance to hang the rug above a porch railing or above a couple of solid chairs. Don’t forget to shake out the rug pad too.
Examine the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be examined for colorfastness to avoid harm. Dab the cleaning solution on a tiny corner of this rug with a white towel. Check to find out if any color transfers to the towel. Allow the test place dry completely, then check again to make certain colors have not bled or faded.
Scrub, if necessary: If the rug is colorfast, apply the soap solution to the rug using a soft-bristle brush or sponge. Dip the sponge/brush to the cleaning solution. Don’t over-wet the fibers–just use as much as needed. Work in a 3- by 3-foot area. Rinse the sponge/brush regularly so the dirt won’t be transferred.
Scrub the rug thoroughly: It is important not to leave any soap substance on the rug. Dip a clean sponge in the rinse water and remove any soap in the area just cleaned.
Blot: Drive as much excess water as you can with a squeegee and moving from the direction of the rug nap. Scrub, rinse and blot an area before moving into the next.
Allow the rug dry thoroughly prior to bringing it back inside, rotating it periodically to promote even drying. Once inside, turn on fans to promote greater air circulation and help the rug dry more completely.
Adjust rug fibers: When the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it could be well worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s instructions about the best way best to operate the machine.
Check related blogs about Rug Cleaning:
Is It Worth Getting Carpets Professionally Cleaned in Carson