What’s The Ideal Way To Clean A Rug?
Area rugs are a great way to add warmth and character to your decor, but after prolonged use, they will require a good cleaning to seem like brand new. For most contemporary rugs, cleaning may be a once-a-year DIY job which saves you the cost of professional cleaning. If your rug is tagged with specific cleaning instructions, follow these.
In general, area rugs just have to be deep cleaned yearly. Listed below are a few ways to Find out If It’s time for Rug Cleaning in Agoura Hills:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a few basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s tag. Try to select a time to clean your rugs when there will be three or four sunny, hot days together. It could be a lot easier to clean your rugs outside, and sun and warm atmosphere will help them dry more quickly and thoroughly. Additionally, the sunlight is a natural and effective deodorizer, which will keep most of the dust and dirt from the house. Whether an outside area isn’t accessible, use any floor area which moisture won’t damage (like vinyl or concrete floor in the kitchen or kitchen.)
Shake or conquer Take smaller rugs and medium-sized rugs outside and give them a fantastic shake to discharge loose dirt and dust. If the rug is large, request a partner for assistance to hang the rug over a porch rail or above a couple of solid chairs. Don’t forget to shake the rug pad too.
Fill another bucket with clean water.
Test the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be examined for colorfastness to prevent damage. Dab the cleaning solution on a tiny corner of this rug with a white towel. Let the test spot dry completely, then check again to make sure colours have not bled or faded.
Dip the sponge/brush into the cleaning solution. Do not over-wet the fibers–just use as much as required. Use gentle pressure to gently scrub the rug. Work in a 3- by 3-foot area. Rinse out the sponge/brush regularly so the dirt will not be transferred.
Rinse the rug thoroughly: It’s important not to leave any soap material on the rug. Dip a clean sponge at the rinse water and remove any soap from the region just cleaned.
Blot: Push out as much excess water as you can with a squeegee and moving from the direction of this rug nap. Scrub, rinse and blot an area before going to the next.
Allow the rug dry thoroughly prior to bringing it back inside, rotating it periodically to promote even drying. Once inside, turn on fans to encourage more air flow and assist the rug dry more completely.
Adjust rug fibers: Once the rug has dried thoroughly, lightly examine the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it may be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions on how best to operate the machine.
Check related blogs about Rug Cleaning:
How to Clean a Rug in Agoura Hills
