Green Carpets Cleaning

Various Techniques for Restretching Loose Carpet

Wall-to-wall carpeting has a smooth and wrinkle-free surface, which is a big plus. If you’ve ever seen carpet being installed, you know that the installers have to use special equipment to stretch the carpet into place.

The main tools are the knee kicker and the power stretcher, which does what its name says. Both have flat aluminum heads with rows of steel teeth that can be moved and are angled forward to better bite into the carpet.

1. Knee Kicker
A knee kicker is about 20 inches long and has a square head with teeth on one end. The knee pad is the same size as the head. With a knee kicker, the edges of the carpet are pulled together.

2. Power Stretcher
Depending on the model, the tubes can be lengthened to more than 40 feet, which lets the stretcher rest against the wall on the other side. A power stretcher has a larger, rectangular head that is usually 15 inches wide and is connected by a spring-loaded lever to a series of telescopic tubes that end in a cushioned block. It does most of the work of stretching the carpet. If you can find a carpet cutter, hire one as well. You’ll also need to rent a “knee kicker” if you have small spots where the motorized carpet stretcher won’t fit (less than 3 feet from the walls). It will cut off carpet edges more precisely and cleanly than a utility knife.

Before you rush to the rental shop to get the tools you need to stretch your carpet, make sure the tack strips are in place and the pad is nailed down. Tack strips look like old yardsticks made of wood that have been nailed together with tiny, very sharp pins. These strips bite into the carpet and keep it in place. Since you probably won’t need the tools for more than a few hours, you should be ready to use them right away to avoid paying rental fees.

Before you can start putting in new carpet, you must first nail tack strips around the room’s edges. There should be a few inches between the strip and the wall. Install the carpet pad, making sure it goes all the way to the edges of the floor where the tack strips are. After stapling the pad with a hammer and stapler, roll out the carpet.

Using the same methods, you can fix older wall-to-wall carpeting that has become loose and has ripples.

Start by pulling the edges of the carpet away from the tack strips. It might be necessary to get new tack strips if the old ones are rotting because of water damage or have lost their grip because of foot traffic.
– Roll the carpet back into place, use a knee kicker to hold it in place along the first wall, and then use a power stretcher to do the same thing again.

Most people walk directly on the carpet more than any other piece of furniture in the house, which causes dirt to build up and general wear and tear. The carpet needs to be kept clean and well-kept if you want it to last longer and look like new. Green Carpet’s Cleaning and other professional carpet cleaners often use hot water extraction to clean carpets. Most professionals do Same Day Carpet Cleaning Bell Canyon.

Using Carpet Cleaning Equipment Bell Canyon

Scroll to Top