Green Carpets Cleaning

How to Clean Dryer Vents and Things Can Happen If You Do Not

Dryer Vent Cleaning in West Hollywood — If a dryer takes forever and a day to dry, then it may be time for you to understand how to clean out the dryer vent. Maybe never? We are not discussing the screen within the dryer. We are discussing the silver tubing exhaust system which conveys all of the warm, wet air out.

Your dryer’s exhaust system may get clogged with lint, which will continue to keep your dryer from working correctly. Because of this, the dryer won’t simply take longer to wash clothing, it will also boost your electrical bill and make a fire threat. It is a lose-lose-lose proposal. As stated by the U.S. Fire Administration, there are approximately 2,900 dryer fires annually, which cause an estimated five fatalities, 100 accidents and $35 million in property loss. The top cause of these fires?

If this does not get you running to clean your dryer, we do not know what’s going to.

Tools you will need:

Step 1: If your dryer runs on gasoline, switch off the gas and disconnect it. This is very important for your security.

Step 2: Disconnect the port and clean the region around it
On the rear of your drier, there’s a clamp attached to the port. Undo the clamp using a screwdriver or nut driver and slip the port away.
Eliminate the port from the back of the drier.
Carefully hit in the opening at the back of the drier and clean the lint out. You may want to use a vacuum cleaner to extract debris.

Step 3: Clean the port from in the construction
The dirtiest areas of the dryer port are the foot or 2 on each end. We advocate using a dryer vent brush to clean inside the port and eliminate built-up lint. Work up the brush indoors as far as you can go. The brush will latch on the lint and haul it from the vent pipes.

Then, you can add the attachment hose of a vacuum to extract any residual dust and lint.

Reattach the port to the drier and twist the clamp forth. Plug your drier back or reattach your gasoline line and then turn the dryer on. Take care to not push the drier back too near the wall. This may collapse the port and cut exhaust, or split the gasoline line.

Step 4: Clean the port from external
At a home, you probably have access into this drier vent from the exterior. Begin with removing the port cover, unscrewing it , if need be, eliminating any caulk using a utility knife.

Reach to the port with a brush and then eliminate built-up lint. In case you’ve got an outside vacuum, add the nozzle to vacuum away lint out there too. Clean lint out of the cover.

Before replacing the cover, then return to the drier, plug it back in, and run it . After about 10 minutes, then turn off the drier, put the cover back to the exterior vent and re-caulk the borders to keep out drafts.

As you’re cleaning the port, you might choose to throw the drier display in the dishwasher. Why? The drier display becomes clogged with fabric oils and lubricants out of drier sheets. These oils may also prevent secure airflow. Many people today would rather use fabric softener sparingly and prevent dryer sheets because of this.

If all goes well and you have done your job correctly, the drier should be in great form. You might choose to clean your dryer vents , or four times annually, even in the event that you’re able to see exhaust coming out of the exterior vent.
How to Clean a Clothes Dryer Vent in West Hollywood
The Importance of Getting Your Dryer Vents in West Hollywood

Scroll to Top