How Do I Clean My Rug At Home?

Rug Cleaning in San Pedro — For many of us, area rugs are a significant investment in decoration. They warm up and add colour to our chambers. They supply soft areas for game playing, movie viewing, and slumber partying. However, in order for rugs to last for decades, they need to be kept. And a significant part of the maintenance is regular cleaning.

Thankfully, as you would like to vacuum carpet twice weekly, you just have to deep-clean an area rug if it is dirty. If the rug isn’t visibly dingy (or clearly foul-smelling), try this test: Simply pick up a corner of the rug and let it flop down on the ground. If a little cloud of dust floats upward, a cleaning is in order.

Sure, you may send a rug to be cleaned off-site by professionalsbut it ai not affordable. If you’re willing to put in a weekend of work, however, it’s eminently possible to perform a good job of cleaning a rug on your own at home. As an added benefit, you will have peace of mind knowing precisely what types of cleaners are used in your rugs–knowledge that’s increasingly important to most, particularly those with young children or chemical sensitivities.

MATERIALS AND TOOLS
1. Vacuum
2. Bucket
5. Sponge
6. Garden hose
8. Rubber gloves (optional)

1. Remove loose dirt with a vacuum.
First, thoroughly vacuum the area rug on both sides. Do not neglect the spine, which inevitably accumulates crumbs, dust, and dirt.

2. Examine the cleaner in your rug for colorfastness.
You have two options for cleaners:

> You are able to follow the mixing instructions on a store-bought rug cleaner/shampoo.

> Or, you can add a few capfuls of mild liquid dish soap into a bucket of warm water. Do not use hot water, as it might shrink fibers or fade color.

Now, examine your cleaner (store-bought or homemade) within an inconspicuous part of the rug, such as a little part on the corner, to be certain that it does not make the colors run. If it does not, proceed to another step.

3. Utilize the cleaner into the rug and let it sit for several minutes.

With a sponge or brush, scrub the shampoo or detergent deep into the rug until you are seeing suds. Permit the solution to sit on the rug and work for several minutes before rinsing.

4.
Thoroughly rinse the rug with a garden hose, ensuring the water is clear of soap suds until you complete.

5. Use a squeegee to remove excess water.
This tool, often utilized in cleaning windows, will do just the tip to squeeze excess water from the rug. Press the squeegee’s rubber-edged blade securely into the rug and pull to get out as much liquid as you can, being careful to work just in the management of this rug’s nap.

6. Permit both sides of the rug to dry out completely.
Lay the rug flat to dry. When the upper side is dry, then flip it over so the bottom can dry as well.

7. Vacuum or brush the rug to loosen compacted fibers.
Run a vacuum or a clean skillet on your area rug to loosen up the fibers of the rug, as they may have compacted throughout the washing/drying process. After that, return your rug to the room and enjoy!

With regular maintenance and cleaning, your rugs will serve your family and home for many years, playing host to dozens of game tourneys, TV marathons, and fireside snuggles.

Check related blogs about Rug Cleaning:
Area Rugs in San Pedro
How Much Does It Cost To Dry Clean A Rug in San Pedro