How Can I Clean My Rug At Home?

Rug Cleaning in Montebello — For a lot of us, area rugs are a significant investment in decor. They warm and add color to our rooms. They supply soft places for game playing, movie viewing, and slumber partying. But in order for rugs to last for years, they need to be kept. And a big part of the maintenance is routine cleaning.

Thankfully, while you want to vacuum carpet twice weekly, you just have to deep-clean an area rug when it is dirty. If the rug is not clearly dingy (or clearly foul-smelling), try this test: Just get a corner of the rug and let it flop down on the floor. In case a tiny cloud of dust floats upward, a cleaning is in order.

Sure, you may send a rug to be cleaned off by specialists but it ai not affordable. If you are eager to devote a weekend of work, however, it is eminently possible to do a fantastic job of cleaning a rug on your own at home. As an added plus, you’ll have peace of mind knowing precisely what types of cleaners are used on your rugs–knowledge that is increasingly important to most, particularly those with young children or chemical sensitivities.

MATERIALS AND TOOLS
1. Vacuum
2. Mild liquid dish soap
4. Bucket
5. Sponge
6.
1. Remove loose dirt using a vacuum.
First, thoroughly vacuum the area rug on both sides. Don’t neglect the spine, which inevitably accumulates crumbs, dust, and dirt.

2. Test the cleaner in your rug for colorfastness.
You have two options for cleaners:

> You can follow the mixing instructions on a store-bought rug cleaner/shampoo.

> Or, you can add a couple of capfuls of mild liquid dish soap into a bucket of warm water. Do not use hot water, as it might shrink fibers or fade colour.

Now, test your cleaner (store-bought or homemade) within an inconspicuous portion of the rug, like a little part on the corner, to make sure that it doesn’t make the colours run. If it doesn’t, proceed to the next step.

3. Utilize the cleaner to the rug and let it sit for many minutes.

With a sponge or brush, scrub the shampoo or detergent deep into the rug until you’re seeing suds. Permit the solution to sit down on the rug and work for several minutes before rinsing.

4.
Thoroughly rinse the rug using a garden hose, making sure the water is clear of soap suds before you finish.

5. Use a squeegee to remove excess water.
This tool, often used in cleaning windows, will do just the tip to squeeze excess water from the rug. Press the squeegee’s rubber-edged blade firmly into the rug and pull to get out as much liquid as you can, being careful to operate only in the management of this rug’s glow.

6. Permit both sides of the rug to dry out completely.
Lay the rug flat to dry. When the top side is dry, flip it over so the bottom can dry as well.

7. Vacuum or brush the rug to loosen compacted fibers.
Run a vacuum or a clean soft-bristled brush over your area rug to loosen up the fibers of the rug, since they may have compacted during the washing/drying procedure. Then, return your rug into the area and revel in!

With regular maintenance and cleaning, your rugs will serve your family and home for many years, playing host to dozens of game tourneys, TV marathons, and fireside snuggles.

Check related blogs about Rug Cleaning:
How to Clean a Rug in Montebello