How Can I Clean My Rug At Home?

Rug Cleaning in Monte Sereno — For many of us, area rugs are a significant investment in decor. They warm and add colour to our rooms. They provide soft areas for game playing, movie viewing, and slumber partying. But in order for rugs to endure for years, they need to be kept. And a big part of the maintenance is routine cleaning.

Fortunately, as you want to vacuum carpet twice weekly, you only have to deep-clean an area rug if it is dirty. If the rug isn’t visibly dingy (or noticeably foul-smelling), try this test: Simply get a corner of the rug and let it flop down on the floor. If a little cloud of dust floats up, a cleaning is in order.

It’s true that you can send a rug to be cleaned off-site by professionalsbut it ai not affordable. If you’re eager to put in a weekend of work, however, it’s eminently possible to do a good job of cleaning a rug on your own in your home. As an extra plus, you will have peace of mind knowing exactly what kinds of cleaners are being used in your rugs–understanding that’s increasingly important to most, especially those who have young kids or chemical sensitivities.

MATERIALS AND TOOLS
1. Mild liquid dish soap
4. Sponge
6. Rubber gloves (optional)

1. Remove loose dirt using a vacuum.
First, thoroughly vacuum the area rug on either side. Do not neglect the spine, which necessarily hastens crumbs, dust, and dirt.

2. Test the cleaner in your rug for colorfastness.
You have two options for cleaners:

> You are able to follow the mixing directions on a store-bought rug cleaner/shampoo.

> Or, you may add a couple of capfuls of mild liquid dish soap into a bucket of warm water. Do not use hot water, as it might shrink fibers or fade colour.

Now, test your cleaner (store-bought or homemade) on an inconspicuous portion of the rug, such as a little part on the corner, to make sure it doesn’t create the colours run. If it does not, proceed to the next step.

3. Work the cleaner into the rug and let it sit for many minutes.

With a sponge or brush, scrub the shampoo or detergent deep to the rug until you are seeing suds. Allow the solution to sit down on the rug and operate for many minutes before rinsing.

4.
Gently wash the rug using a garden hose, making sure the water is clear of soap suds until you finish.

5.
This tool, frequently used in cleaning windows, will do just the trick to squeeze excess water from the rug. Press the squeegee’s rubber-edged blade firmly into the rug and pull to get out as much fluid as possible, being careful to work only in the management of the rug’s glow.

6. Permit either side of the rug to dry out completely.
Lay the rug flat to dry. When the top side is dry, then flip it over so the bottom can dry as well.

7. Vacuum or brush the rug to loosen compacted fibers.
Run a vacuum or a clean skillet over your area rug to loosen up the fibers of the rug, since they might have compacted during the washing/drying procedure. After that, return your rug into the area and revel in!

With regular maintenance and cleaning, your rugs will serve your family and home for many years, playing host to scores of game tourneys, TV marathons, and fireside snuggles.

Check related blogs about Rug Cleaning:
How to Clean Wool Area Rugs in Monte Sereno