How Can I Clean My Rug At Home?
Rug Cleaning in Dana Point — For a lot of us, area rugs are a substantial investment in decoration. They warm up and add color to our rooms. They provide soft places for game playing, movie viewing, and slumber partying. However, in order for rugs to last for decades, they ought to be kept. And a big part of that maintenance is routine cleaning.
Thankfully, while you want to vacuum carpet twice weekly, you only need to deep-clean an area rug when it’s dirty. If the rug is not clearly dingy (or noticeably foul-smelling), try this test: Simply get a corner of the rug and let it flop down onto the floor. If a little cloud of dust floats upward, a cleaning is in order.
It’s true that you can send a rug to be cleaned off by specialists but it ai not cheap. If you’re willing to devote a weekend of work, however, it’s eminently possible to do a good job of cleaning a rug by yourself in your home. As an added benefit, you will have peace of mind knowing precisely what kinds of cleaners are being used on your rugs–knowledge that’s increasingly important to most, particularly those who have young children or chemical sensitivities.
MATERIALS AND TOOLS
1. Remove loose dirt with a vacuum.
First, thoroughly vacuum the area rug on either side. Don’t neglect the spine, which inevitably accumulates crumbs, dust, and dirt.
2. Test the cleaner on your rug for colorfastness.
You have two choices for cleaners:
> You are able to follow the mixing instructions on a store-bought rug cleaner/shampoo.
> Or, you may add a couple of capfuls of mild liquid dish soap into a bucket of warm water. Do not use hot water, as it might shrink fibers or fade color.
Now, test your cleaner (store-bought or homemade) within an inconspicuous part of the rug, like a small part on the very corner, to make sure that it doesn’t make the colors run. If it doesn’t, proceed to the next step.
3. Utilize the cleaner to the rug and let it sit for several minutes.
Using a sponge or brush, scrub the shampoo or detergent deep to the rug until you are seeing suds. Allow the solution to sit on the rug and work for many minutes before rinsing.
Gently wash the rug using a garden hose, making sure the water is clear of soap suds before you finish.
This instrument, frequently utilized in cleaning windows, will do just the tip to squeeze excess water out of the rug. Press the squeegee’s rubber-edged blade securely to the rug and pull to get out as much fluid as possible, being careful to operate just in the direction of this rug’s glow.
6. Permit either side of the rug to dry out entirely.
Lay the rug flat to dry. When the top side is dry, flip it over so the bottom can dry as well.
7. Vacuum or brush the rug to loosen compacted fibers.
Run a vacuum or a clean skillet on your area rug to loosen up the fibers of the rug, as they may have compacted during the washing/drying procedure. Then, return your rug to the room and revel in!
With regular maintenance and cleaning, your rugs will serve your loved ones and home for many years, playing host to dozens of match tourneys, TV marathons, and fireside snuggles.