How Can I Clean My Rug In Your Home?

Rug Cleaning in Atherton — For a lot of us, area rugs are a substantial investment in decoration. They warm up and add color to our chambers. They provide soft areas for game playing, movie viewing, and slumber partying. But in order for rugs to last for decades, they need to be kept. And a significant part of the maintenance is routine cleaning.

Thankfully, while you would like to vacuum carpet twice weekly, you just have to deep-clean an area rug if it is dirty. If the rug is not visibly dingy (or noticeably foul-smelling), try this test: Simply get a corner of the rug and let it flop down onto the floor. If a tiny cloud of dust floats up, a cleaning is in order.

Sure, you can send out a rug to be cleaned off-site by specialists –but it ain’t cheap. If you’re willing to devote a weekend of work, however, it’s eminently possible to perform a good job of cleaning a rug on your own in your home. As an extra benefit, you’ll have peace of mind knowing precisely what kinds of cleaners are being used on your rugs–understanding that’s increasingly important to many, especially those who have young children or chemical sensitivities.

MATERIALS AND TOOLS
1. Vacuum
2. Rug shampoo
3. Mild liquid dish soap
4. Rubber gloves (optional)

1. Remove loose dirt using a vacuum.
First, thoroughly vacuum the area rug on either side. Do not neglect the back, which inevitably hastens crumbs, dust, and dirt.

2. Test the cleaner in your rug for colorfastness.
You have two options for cleaners:

> You are able to follow the mixing directions on a store-bought rug cleaner/shampoo.

> Or, you can add a few capfuls of mild liquid dish soap into a bucket of warm water. Don’t use hot water, as it might shrink fibers or fade color.

Now, test your cleaner (store-bought or homemade) on an inconspicuous part of the rug, such as a small part on the corner, to make sure that it doesn’t create the colours run. If it doesn’t, proceed to another step.

3. Work the cleaner to the rug and let it sit for many minutes.

Using a sponge or brush, scrub the shampoo or detergent deep into the rug until you’re seeing suds. Permit the solution to sit on the rug and operate for several minutes before rinsing.

4.
Thoroughly rinse the rug using a garden hose, making sure the water is clear of soap suds before you finish.

5. Use a squeegee to remove excess water.
This tool, frequently utilized in cleaning windows, will do just the trick to squeeze excess water out of the rug. Press the squeegee’s rubber-edged blade firmly into the rug and pull to get out as much fluid as you can, being careful to work only in the management of this rug’s glow.

6. Permit both sides of the rug to dry out completely.
Lay the rug flat to dry. Once the top side is dry, then flip it over so the bottom can dry also.

7. Vacuum or brush the rug to loosen compacted fibers.
Run a vacuum or a clean soft-bristled brush on your area rug to loosen up the fibers of the rug, since they may have compacted during the washing/drying process. After that, return your rug into the area and enjoy!

With regular maintenance and cleaning, your rugs will serve your family and home for several years, playing host to scores of match tourneys, TV marathons, and fireside snuggles.

Check related blogs about Rug Cleaning:
Area Rugs in Atherton
How to Clean a Rug in Atherton