How Are Rugs Cleaned in Sun Valley - Green Carpet's Cleaning

Could your area rugs use a clean? Discover how to clean a rug and you’re able to bring all your flooring coverings back to life whenever you like. After a time, vacuuming only isn’t enough to get it truly clean–and that is when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Sun Valley is a project you can readily take on yourself. There’s no need to hire expert rug cleaners for the task–unless your rug is extremely fragile (by way of example, an antique rug, Persian rug, or oriental rug).

Note: There’s no need to clean rugs on a schedule. Keep reading to find out how to Combine those well-worn area rugs so that they look as good as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Here is exactly what you will Have to Have on hand to complete a successful area Rug Cleaning in Sun Valley:

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Gently vacuum about the rug on either side. You want to make sure every last bit of debris is gone.

3. Mix Your Cleaner
When it comes to the real cleaning alternative, you can use a rug shampoo. Whatever shampoo you choose, follow its precise directions (found on the bottle) for blending.

Don’t use hot water as it could shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, make sure the cleaner doesn’t cause the colors to run. Examine the alternative to the corner of the rug to be certain it is colorfast. If the color does not bleed, it is safe to proceed to the next step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug for a five minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning process.

6. Rinse the Rug
Make sure all of the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
Now, you are going to want to get rid of as much surplus water in the rug because possible so it’ll dry faster. It’s possible to use a wet-dry vacuum should you have one, or use a squeegee at the direction of the rest.

8. Permit the Rug Dry
The next-to-last step to clean an area rug is simply letting it dry. Lay the rug flat and allow the top of the rug to dry thoroughly. Then, turn it over to allow the base side dry. Fans can help hasten the procedure. Make sure the rug is totally dry before you return it to the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads may get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush with a soft-bristled brush. Now you are finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you can complete the job when you prefer.