How Are Rugs Cleaned in Santa Paula - Green Carpet's Cleaning

How Are Rugs Cleaned?

Could your area rugs utilize a deep clean? Learn how to clean a rug yourself and you’re able to bring all of your floor coverings back to life when you like. Area rugs may bring a room together, but they also takes a beating, from foot traffic to spills and pets. After a while, vacuuming only isn’t enough to receive it really clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Santa Paula is a job you can readily take on yourself. There is no need to employ expert rug cleaners for the task–unless the rug is extremely delicate (for example, an antique rug, Persian rug, or oriental rug).

Note: There is no requirement to clean rugs on a schedule. Instead, you should simply clean the rugs when they are visibly dirty or have an odor. Keep reading to learn how to refresh those well-worn area rugs so they look as good as they did when you unrolled them.

1. Collect Your Tools and Supplies

Here’s what you’ll need to have on hand to complete a successful area Rug Cleaning in Santa Paula:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Thoroughly vacuum on the rug on either side. You should be certain every last bit of debris is gone.

3. Mix Your Cleaner
When it comes to the real cleaning alternative, you can use a rug shampoo. Whatever shampoo you choose, follow its specific directions (found on the bottle) for mixing.

4. Do a Color Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Examine the solution to the corner of the rug to be certain it is colorfast. If the color does not bleed, it’s safe to proceed to the next step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a couple of minutes before you start rinsing. Anything less than that and you’ll shortchange the cleaning process.

6. Rinse the Rug
Make sure all of the cleaning solution is totally removed from the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to do away with as much surplus water from the rug as you can so it’ll dry quicker. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee in the direction of the nap.

8. Permit the Rug Dry
The next-to-last measure to clean an area rug is simply letting it dry. Lay the rug level and allow the cover of the rug to dry completely. Then, turn it over to allow the bottom side dry. Fans can help speed up the process. Make sure the rug is totally dry before you return into the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads can get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush with a soft-bristled brush. Now you are finished, and can enjoy your newly cleaned carpet. You understand how to clean an area rug yourself, and you’re able to complete the job when you prefer.