Can your area rugs use a deep clean? Discover how to clean a rug yourself and you’re able to bring all your flooring coverings back to life when you prefer. After a time, vacuuming just isn’t sufficient to receive it really clean–and that is when knowing how to do it yourself comes in super handy.

Area Rug Cleaning in Santa Clara is a job you can readily take on yourself. There’s no need to employ expert rug cleaners for the task–unless the rug is extremely delicate (for instance, an antique rug, Persian rug, or oriental rug).

Note: There’s no need to clean rugs on a schedule. Read on to find out how to refresh those well-worn area rugs so that they look as good as they did when you unrolled them.

1.

Here is what you’ll Have to Have on hand to complete a successful area Rug Cleaning in Santa Clara:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on both sides. You want to be certain every last piece of debris is gone. If you have pets, then use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the actual cleaning alternative, you can use a rug shampoo. Whatever shampoo you opt for follow its precise instructions (located on the bottle) for mixing.

As an alternative, you may even use mild dish soap mixed in a bucket with warm water.

4. Do a Colour Test
Before you start scrubbing, make sure that the cleaner does not cause the colors to run. Test the solution to the corner of the rug to make sure it’s colorfast. If the color does not bleed, it is safe to proceed to the next step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug for a couple of minutes before you start rinsing. Anything less than this and you’re going to shortchange the cleaning procedure.

6. Rinse the Rug
Be certain all of the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.

7. Remove Excess Water
Now, you are going to want to get rid of as much excess water in the rug as possible so it’ll dry quicker. You can use a wet-dry vacuum if you have one, or use a squeegee in the direction of the rest.

8. Permit the Rug Dry
The next-to-last step to clean an area rug is simply allowing it to dry. Lay the rug flat and allow the top of the rug to dry thoroughly. After that, turn it over to allow the base side dry. Fans may help hasten the process. Make sure the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and squished. Revive them by running a vacuum within the now-dry rug, or brush them with a foul-smelling brush. Now you’re finished, and can enjoy your newly cleaned carpet. You understand how to clean an area rug yourself, and you’re able to finish the job when you prefer.

Check related blogs about Rug Cleaning:
How Can I Clean My Rug At Home in Santa Clara