How Are Rugs Cleaned?

Could your area rugs use a clean? Learn how to clean a rug and you’re able to bring all your floor coverings back to life when you like. Area rugs can bring a room together, but they also takes a beating, from foot traffic to spills and pets. After a time, vacuuming just isn’t enough to receive it really clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Playa Del Rey is a project you can readily take on your own.

Notice: There’s no need to clean rugs on a program. Keep reading to find out how to refresh those well-worn area rugs so they look as great as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Here is exactly what you’ll need to have on hand to complete a successful area Rug Cleaning in Playa Del Rey:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum on the rug on both sides. You want to be certain every last bit of debris has been gone. For those who have pets, use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you opt for follow its specific directions (located on the bottle) for mixing.

Don’t use hot water since it could shrink the rug or cause fading.

4. Do a Colour Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Test the alternative to the corner of the rug to make sure it’s colorfast. If the color doesn’t bleed, it is safe to proceed to the next step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a five minutes before you start rinsing. Anything less than that and you’re going to shortchange the cleaning process. Give it those five minutes to set in and start lifting away dirt.

6. Rinse the Rug
Scrub the soap out of this rug using a garden hose or buckets of clean water. Make sure all the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to get rid of as much surplus water from the rug as possible so it’ll dry quicker.

8. Let the Rug Dry
Lay the rug flat and allow the top of the rug to dry completely. After that, turn it over to allow the bottom side dry. Fans may help hasten the procedure. Be certain that the rug is totally dry before you return into the area.

9.
During the cleaning process, threads and fibers may get compacted and squished. Revive them by conducting a vacuum over the now-dry rug, or brush with a foul-smelling brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You know how to clean an area rug your self, and you can complete the job whenever you prefer.

Check related blogs about Rug Cleaning:
How to Clean Wool Area Rugs in Playa Del Rey