Green Carpets Cleaning

Could your area rugs use a deep clean? Discover how to clean a rug and you’re able to bring all your flooring coverings back to life when you prefer. Area rugs may bring a room together, but they also requires a beating, from foot traffic to spills and pets. After a while, vacuuming just isn’t sufficient to get it really clean–and that’s when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Pinole is a project you can easily take on your own.

Note: There is no need to clean rugs on a schedule. Instead, you should simply clean the rugs when they are visibly dirty or have an odor. Keep reading to learn how to Combine those well-worn area rugs so they look as great as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Here’s exactly what you will need to have on hand to complete a successful area Rug Cleaning in Pinole:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on either side. You want to be certain every last bit of debris is gone. For those who have pets, then use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the actual cleaning solution, you can use a rug shampoo. Whatever shampoo you opt for follow its specific directions (located on the bottle) for blending.

As an alternative, you may also use gentle dish detergent mixed in a bucket with warm water. Don’t use hot water as it can shrink the rug or cause fading.

4. Do a Color Test
Before you begin scrubbing, make sure the cleaner doesn’t cause the colors to run. Examine the solution on the corner of the rug to be certain it is colorfast. If the color does not bleed, it is safe to move on to the next step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug for a couple of minutes before you start rinsing. Anything less than that and you’re going to shortchange the cleaning process. Give it those five minutes to install and get started lifting away dirt.

6. Rinse the Rug
Rinse the soap from this rug using a garden hose or buckets of clean water. Be sure all of the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
At this point, you are going to want to do away with as much excess water from the rug as possible so it will dry quicker.

8. Let the Rug Dry
Lay the rug level and allow the cover of the rug to dry completely. After that, turn it over to let the bottom side dry. Fans may help hasten the process. Be certain that the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by running a vacuum within the now-dry rug, or brush with a soft-bristled brush. Now you are finished, and may enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you can complete the job when you prefer.

Check related blogs about Rug Cleaning:
Exactly-How-A-Rug-Can-Make-Your-Room-Perfect in Pinole
How-Can-I-Clean-My-Rug-At-Home in Pinole

Scroll to Top