Green Carpets Cleaning


Could your area rugs utilize a deep clean? Discover how to clean a rug and you can bring all your flooring coverings back to life when you like. After a while, vacuuming just is not enough to receive it truly clean–and that is when knowing how to do it yourself comes in super handy.

Area Rug Cleaning in Petaluma is a job you can readily take on your own. There is no need to employ expert rug cleaners to the task–unless your rug is extremely delicate (by way of example, an antique rug, Persian rug, or oriental rug).

Note: There is no need to clean rugs on a program. Read on to find out how to refresh those well-worn area rugs so that they look as good as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Here is what you will need to have on hand to complete a successful area Rug Cleaning in Petaluma:

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Gently vacuum about the rug on either side. You want to be certain every last bit of debris has been gone.

3. Mix Your Cleaner
When it comes to the actual cleaning alternative, you may use a rug shampoo. Whatever shampoo you opt for follow its precise instructions (located on the bottle) for mixing.

Do not use hot water as it can shrink the rug or cause fading.

4. Do a Color Test
Before you begin scrubbing, be sure the cleaner does not cause the colors to run. Test the solution to the corner of the rug to be certain it is colorfast. If the color doesn’t bleed, it is safe to proceed to another step.

5. Wash the Rug
Let the cleaner sit on the rug for a five minutes before you start rinsing. Anything less than this and you’re going to shortchange the cleaning process. Give it those five minutes to install and start lifting away dirt.

6. Rinse the Rug
Be sure all the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
At this point, you’ll want to do away with as much excess water in the rug as you can so it will dry quicker. It’s possible to use a wet-dry vacuum should you have one, or use a squeegee at the direction of the nap.

8. Let the Rug Dry
Lay the rug level and permit the cover of the rug to dry completely. After that, flip it over to allow the bottom side dry. Fans may help hasten the process. Make sure the rug is fully dry before you return into the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by running a vacuum within the now-dry rug, or brush with a foul-smelling brush. Now you’re finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug your self, and you’re able to complete the job when you like.

Check related blogs about Rug Cleaning:
Business Cleaning Business — A Strategy For The Future in Petaluma
How Much Does It Cost To Dry Clean A Rug in Petaluma

Scroll to Top