Can your area rugs use a deep clean? Learn how to clean a rug and you’re able to bring all of your flooring coverings back to life whenever you like. Area rugs may bring a room together, but they also requires a beating, in the foot traffic to spills and pets. After a time, vacuuming only isn’t sufficient to receive it truly clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Napa is a job you can easily take on your own.

Notice: There is no requirement to clean rugs on a schedule. Read on to find out how to refresh those well-worn area rugs so that they look as good as they did when you first unrolled them.

1.

Here is exactly what you will need to have on hand to complete a successful area Rug Cleaning in Napa:

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum about the rug on both sides. You want to make sure every last piece of debris has been gone.

3. Mix Your Cleaner
If it comes to the actual cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific directions (found on the bottle) for blending.

As an alternative, you may even use mild dish soap mixed in a bucket with warm water. Do not use hot water since it can shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, be sure the cleaner does not cause the colors to run. Examine the solution on the corner of the rug to make sure it is colorfast. If the color doesn’t bleed, it’s safe to proceed to another step.

5. Wash the Rug
Allow the cleaner sit on the rug for a couple of minutes before you start rinsing. Anything less than this and you’ll shortchange the cleaning process.

6. Rinse the Rug
Scrub the soap from the rug using a garden hose or buckets of clean water. Be certain all the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
At this point, you are going to want to get rid of as much surplus water in the rug because possible so it’ll dry quicker. You can use a wet-dry vacuum if you have one, or use a squeegee in the direction of the rest.

8. Permit the Rug Dry
Lay the rug level and allow the top of the rug to dry completely. After that, flip it over to let the base side dry. Fans can help hasten the process. Be certain that the rug is fully dry before you return it to the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads can get compacted and squished. Revive them by running a vacuum within the now-dry rug, or brush with a soft-bristled brush. Now you’re finished, and may enjoy your newly cleaned carpet. You know how to clean an area rug your self, and you can complete the job when you like.

Check related blogs about Rug Cleaning:
Exactly-How-A-Rug-Can-Make-Your-Room-Perfect in Napa