Green Carpets Cleaning


How Are Rugs Cleaned?

Can your area rugs utilize a clean? Learn how to clean a rug yourself and you’re able to bring all your flooring coverings back to life whenever you prefer. After a time, vacuuming just is not sufficient to get it truly clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Milpitas is a job you can readily take on your own. There’s no need to employ professional rug cleaners to your job –unless the rug is extremely fragile (by way of example, an antique rug, Persian rug, or oriental rug).

Note: There is no need to clean rugs on a schedule. Alternatively, you should just clean the rugs when they are visibly dirty or have an odor. Read on to find out how to refresh those well-worn area rugs so they look as good as they did when you unrolled them.

1. Gather Your Tools and Supplies

Here is what you will need to have on hand to complete a successful area Rug Cleaning in Milpitas:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum about the rug on both sides. You want to make sure every last piece of debris has been gone. If you have pets, then use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (found on the jar ) for blending.

4. Do a Colour Test
Before you begin scrubbing, be sure that the cleaner does not cause the colors to run. Examine the solution on the corner of the rug to make sure it is colorfast. If the color doesn’t bleed, it’s safe to proceed to the next step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a couple of minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning process.

6. Rinse the Rug
Rinse the soap out of the rug using a garden hose or buckets of clean water. Make certain all of the cleaning solution is totally removed from the area rug along with the runoff water is crystal clear.

7. Remove Excess Water
At this point, you are going to want to get rid of as much surplus water in the rug because you can so it will dry quicker.

8. Let the Rug Dry
The next-to-last measure to clean an area rug is just letting it dry. Lay the rug flat and permit the cover of the rug to dry thoroughly. After that, turn it over to let the bottom side dry. Fans may help speed up the process. Make sure the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and compacted. Revive them by conducting a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you are finished, and may enjoy your freshly cleaned carpet. You know how to clean an area rug your self, and you can complete the job whenever you prefer.

Check related blogs about Rug Cleaning:
Area Rugs in Milpitas
How Can I Clean My Rug At Home in Milpitas

Scroll to Top