How Are Rugs Cleaned in Maywood

Can your area rugs use a deep clean? Learn how to clean a rug and you’re able to bring all of your floor coverings back to life whenever you prefer. Area rugs may bring a room together, but they also requires a beating, from foot traffic to spills and pets. After a time, vacuuming just is not sufficient to get it truly clean–and that’s when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Maywood is a project you can easily take on yourself. There is no need to hire professional rug cleaners for the task–unless the rug is extremely delicate (by way of example, an antique rug, Persian rug, or oriental rug).

Note: There’s no need to clean rugs on a schedule. Instead, you should simply clean the rugs when they are visibly dirty or have an odor. Keep reading to learn how to refresh those well-worn area rugs so they look as great as they did when you first unrolled them.


Here’s what you will need to have on hand to complete a successful area Rug Cleaning in Maywood:

Soft-bristle brush or sponge
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Thoroughly vacuum about the rug on both sides. You want to make sure every last bit of debris is gone.

3. Mix Your Cleaner
If it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you opt for follow its precise instructions (located on the jar ) for mixing.

As an alternative, you can also use mild dish soap mixed in a bucket with warm water. Do not use hot water since it could shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, be sure that the cleaner doesn’t cause the colors to run. Test the solution on the corner of the rug to be certain it is colorfast. If the color doesn’t bleed, it’s safe to proceed to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug for a couple of minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning procedure.

6. Rinse the Rug
Scrub the soap out of this rug using a garden hose or buckets of clean water. Be sure all of the cleaning solution is totally removed from the area rug and the runoff water is crystal clear.

7. Remove Excess Water
Now, you are going to want to do away with as much surplus water in the rug as possible so it will dry faster.

8. Permit the Rug Dry
The next-to-last measure to clean an area rug is just allowing it to dry. Lay the rug flat and permit the top of the rug to dry thoroughly. After that, turn it over to allow the base side dry. Fans can help hasten the process. Make sure the rug is fully dry before you return into the area.

During the cleaning process, threads and fibers may get compacted and squished. Revive them by conducting a vacuum within the now-dry rug, or brush them with a soft-bristled brush. Now you are finished, and may enjoy your freshly cleaned carpet. You understand how to clean an area rug yourself, and you can complete the job whenever you like.

Check related blogs about Rug Cleaning:
Exactly How A Rug Can Make Your Room Perfect in Maywood