How Are Rugs Cleaned in Los Altos - Green Carpet's Cleaning

Can your area rugs use a clean? Discover how to clean a rug and you can bring all of your floor coverings back to life when you prefer. After a time, vacuuming only isn’t enough to get it truly clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Los Altos is a project you can easily take on your own. There’s no need to hire expert rug cleaners for the task–unless your rug is extremely fragile (for example, an antique rug, Persian rug, or oriental rug).

Notice: There is no requirement to clean rugs on a schedule. Keep reading to find out how to refresh those well-worn area rugs so they look as good as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on either side. You want to make sure every last piece of debris is gone. If you have pets, use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the real cleaning alternative, you may use a rug shampoo. Whatever shampoo you opt for follow its specific directions (found on the jar ) for blending.

Do not use hot water since it could shrink the rug or cause fading.

4. Do a Colour Test
Before you start scrubbing, be sure that the cleaner does not cause the colors to run. Test the solution to the corner of the rug to be certain it is colorfast. If the color doesn’t bleed, it’s safe to move on to another step.

5. Wash the Rug
Let the cleaner sit on the rug for a couple of minutes before you begin rinsing. Anything less than this and you’re going to shortchange the cleaning process. Give it those five minutes to set in and start lifting away dirt.

6. Rinse the Rug
Scrub the soap from the rug using a garden hose or buckets of clean water. Make sure all the cleaning solution is completely removed from the area rug along with the runoff water is crystal clear.

7. Remove Excess Water
At this point, you’ll want to do away with as much surplus water in the rug because you can so it’ll dry quicker.

8. Let the Rug Dry
Lay the rug level and permit the top of the rug to dry thoroughly. Then, flip it over to let the bottom side dry. Fans can help hasten the process. Make sure the rug is fully dry before you return it to the area.

9.
During the cleaning process, threads and fibers can get compacted and compacted. Revive them by conducting a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and may enjoy your freshly cleaned carpet. You know how to clean an area rug your self, and you’re able to complete the job when you prefer.