How Are Rugs Cleaned in Larkspur - Green Carpet's Cleaning

How Are Rugs Cleaned?

Can your area rugs utilize a clean? Discover how to clean a rug and you’re able to bring all your floor coverings back to life when you like. After a time, vacuuming just is not sufficient to receive it truly clean–and that is when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Larkspur is a project you can readily take on your own.

Note: There is no need to clean rugs on a schedule. Keep reading to learn how to refresh those well-worn area rugs so they look as good as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Here is what you’ll need to have on hand to complete a successful area Rug Cleaning in Larkspur:

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum on the rug on either side. You should make sure every last bit of debris has been gone. If you have pets, use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the actual cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (found on the bottle) for blending.

Alternatively, you can also use gentle dish soap mixed in a bucket with warm water.

4. Do a Colour Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Test the alternative to the corner of the rug to be certain it is colorfast. If the color doesn’t bleed, it’s safe to proceed to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug for a couple of minutes before you begin rinsing. Anything less than that and you’ll shortchange the cleaning procedure.

6. Rinse the Rug
Scrub the soap from the rug using a garden hose or buckets of clean water. Make sure all the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
Now, you are going to want to do away with as much excess water in the rug as you can so it will dry faster. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee at the direction of the nap.

8. Let the Rug Dry
Lay the rug level and permit the top of the rug to dry thoroughly. Then, flip it over to let the base side dry. Fans may help hasten the procedure. Make sure the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by conducting a vacuum within the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you’re able to finish the job whenever you prefer.