How-Are-Rugs-Cleaned in Laguna Woods - Green Carpet's Cleaning

Can your area rugs use a clean? Discover how to clean a rug yourself and you’re able to bring all of your floor coverings back to life whenever you like. Area rugs can bring a room together, but they also requires a beating, from foot traffic to spills and pets. After a time, vacuuming just is not enough to receive it truly clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Laguna Woods is a project you can readily take on your own. There is no need to employ professional rug cleaners to your job –unless the rug is extremely fragile (for example, an antique rug, Persian rug, or oriental rug).

Notice: There is no requirement to clean rugs on a schedule. Instead, you should just clean the rugs when they are visibly dirty or have an odor. Read on to learn how to refresh those well-worn area rugs so that they look as good as they did when you unrolled them.

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum about the rug on either side. You want to make sure every last piece of debris is gone. For those who have pets, use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning alternative, you can use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (located on the bottle) for mixing.

Do not use hot water as it could shrink the rug or cause fading.

4. Do a Colour Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Test the solution to the corner of the rug to be certain it is colorfast. If the color does not bleed, it’s safe to move on to the next step.

5. Wash the Rug
Allow the cleaner sit on the rug for a five minutes before you begin rinsing. Anything less than that and you’ll shortchange the cleaning process.

6. Rinse the Rug
Rinse the soap out of this rug using a garden hose or buckets of clean water. Be sure all the cleaning solution is completely removed from the area rug and the runoff water is crystal clear.

7. Remove Extra Water
At this point, you’ll want to get rid of as much excess water from the rug as possible so it will dry quicker. You can use a wet-dry vacuum if you have one, or use a squeegee at the direction of the rest.

8. Let the Rug Dry
The next-to-last step to clean an area rug is just allowing it to dry. Lay the rug level and allow the top of the rug to dry thoroughly. Then, flip it over to allow the bottom side dry. Fans may help speed up the procedure. Be certain that the rug is totally dry before you return it to the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush with a soft-bristled brush. Now you’re finished, and may enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you’re able to finish the job whenever you like.