How Are Rugs Cleaned in La Puente - Green Carpet's Cleaning

How Are Rugs Cleaned?

Can your area rugs utilize a deep clean? Discover how to clean a rug yourself and you can bring all your floor coverings back to life whenever you like. After a time, vacuuming just isn’t sufficient to receive it really clean–and that is when knowing the way to do it yourself comes in super handy.

Area Rug Cleaning in La Puente is a job you can readily take on your own. There is no need to employ expert rug cleaners to your task–unless the rug is extremely delicate (for instance, an antique rug, Persian rug, or oriental rug).

Note: There is no need to clean rugs on a schedule. Alternatively, you should just clean the rugs when they are visibly dirty or have an odor. Read on to learn how to Combine those well-worn area rugs so they look as good as they did when you unrolled them.

1. Gather Your Tools and Supplies

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on both sides. You want to make sure every last piece of debris has been gone. For those who have pets, then use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the real cleaning alternative, you can use a rug shampoo. Whatever shampoo you opt for follow its precise instructions (found on the jar ) for blending.

Do not use hot water as it could shrink the rug or cause fading.

4. Do a Color Test
Before you begin scrubbing, be sure the cleaner does not cause the colors to run. Test the solution to the corner of the rug to make sure it’s colorfast. If the color does not bleed, it’s safe to move on to the next step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a five minutes before you start rinsing. Anything less than that and you’ll shortchange the cleaning process. Give it those five minutes to set in and start lifting away dirt.

6. Rinse the Rug
Be certain all the cleaning solution is completely removed from the area rug along with the runoff water is crystal clear.

7. Remove Excess Water
At this point, you’ll want to get rid of as much excess water from the rug because possible so it will dry quicker. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee at the direction of the nap.

8. Let the Rug Dry
The next-to-last measure to clean an area rug is just allowing it to dry. Lay the rug level and allow the top of the rug to dry thoroughly. After that, turn it over to allow the bottom side dry. Fans can help speed up the process. Be certain that the rug is fully dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and compacted. Revive them by conducting a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and can enjoy your newly cleaned carpet. You understand how to clean an area rug your self, and you can complete the job when you prefer.