Green Carpets Cleaning


How Are Rugs Cleaned?

Could your area rugs use a deep clean? Discover how to clean a rug yourself and you can bring all your flooring coverings back to life whenever you like. After a time, vacuuming only is not sufficient to get it really clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Hillsborough is a project you can readily take on yourself. There’s no need to employ expert rug cleaners to your task–unless your rug is extremely fragile (by way of instance, an antique rug, Persian rug, or oriental rug).

Notice: There’s no need to clean rugs on a schedule. Instead, you should just clean the rugs when they are visibly dirty or have an odor. Read on to learn how to refresh those well-worn area rugs so they look as good as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Thoroughly vacuum about the rug on both sides. You should make sure every last bit of debris has been gone.

3. Mix Your Cleaner
If it comes to the actual cleaning solution, you can use a rug shampoo. Whatever shampoo you opt for follow its precise directions (located on the jar ) for blending.

Do not use hot water since it can shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, be sure the cleaner does not cause the colors to run. Test the solution on the corner of the rug to make sure it is colorfast. If the color doesn’t bleed, it is safe to move on to another step.

5. Wash the Rug
Let the cleaner sit on the rug to get a couple of minutes before you start rinsing. Anything less than this and you’ll shortchange the cleaning process.

6. Rinse the Rug
Be certain all the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Extra Water
At this point, you are going to want to get rid of as much excess water in the rug as you can so it will dry quicker. It’s possible to use a wet-dry vacuum should you have one, or use a squeegee in the direction of the rest.

8. Permit the Rug Dry
The next-to-last step to clean an area rug is simply allowing it to dry. Lay the rug flat and permit the cover of the rug to dry thoroughly. After that, turn it over to let the bottom side dry. Fans may help hasten the procedure. Make sure the rug is totally dry before you return it to the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and compacted. Revive them by conducting a vacuum within the now-dry rug, or brush with a soft-bristled brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you can finish the job when you like.

Check related blogs about Rug Cleaning:
10 Tips to Know Before Getting a Rug in Hillsborough
How Much Does It Cost To Dry Clean A Rug in Hillsborough

Scroll to Top