Green Carpets Cleaning


Can your area rugs use a clean? Discover how to clean a rug and you’re able to bring all of your flooring coverings back to life when you like. After a while, vacuuming only isn’t enough to receive it really clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Hawthorne is a job you can easily take on your own.

Note: There’s no need to clean rugs on a schedule. Read on to learn how to refresh those well-worn area rugs so that they look as great as they did when you unrolled them.

1.

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Gently vacuum on the rug on both sides. You want to be certain every last bit of debris has been gone. If you have pets, then use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the real cleaning alternative, you can use a rug shampoo. Whatever shampoo you choose, follow its precise instructions (found on the jar ) for blending.

Don’t use hot water since it can shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, be sure that the cleaner does not cause the colors to run. Test the solution on the corner of the rug to make sure it’s colorfast. If the color doesn’t bleed, it is safe to proceed to another step.

5. Wash the Rug
Allow the cleaner sit on the rug to get a couple of minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning process. Give it those five minutes to install and start lifting away dirt.

6. Rinse the Rug
Make sure all of the cleaning solution is totally removed from the area rug along with the runoff water is crystal clear.

7. Remove Excess Water
Now, you’ll want to get rid of as much excess water in the rug because you can so it will dry quicker. You can use a wet-dry vacuum should you have one, or use a squeegee in the direction of the rest.

8. Let the Rug Dry
Lay the rug level and allow the top of the rug to dry completely. After that, turn it over to allow the base side dry. Fans can help speed up the procedure. Be certain that the rug is fully dry before you return into the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by conducting a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You know how to clean an area rug yourself, and you can finish the job whenever you prefer.

Check related blogs about Rug Cleaning:
Business Cleaning Business — A Strategy For The Future in Hawthorne
How Much Does It Cost To Dry Clean A Rug in Hawthorne

Scroll to Top