Green Carpets Cleaning


How Are Rugs Cleaned?

Could your area rugs utilize a clean? Discover how to clean a rug and you can bring all of your floor coverings back to life whenever you prefer. Area rugs can bring a room together, but they also requires a beating, in the foot traffic to pets and spills. After a while, vacuuming just is not enough to get it really clean–and that is when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Garden Grove is a project you can readily take on your own. There’s no need to employ expert rug cleaners for the task–unless your rug is extremely delicate (for example, an antique rug, Persian rug, or oriental rug).

Note: There is no need to clean rugs on a program. Alternatively, you should just clean the rugs when they are visibly dirty or have an odor. Read on to learn how to refresh those well-worn area rugs so they look as great as they did when you unrolled them.

1. Collect Your Tools and Supplies

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Thoroughly vacuum about the rug on both sides. You should be certain every last bit of debris is gone. If you have pets, then use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (located on the jar ) for mixing.

Don’t use hot water as it can shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, make sure the cleaner doesn’t cause the colors to run. Examine the solution to the corner of the rug to make sure it’s colorfast. If the color doesn’t bleed, it’s safe to proceed to another step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a couple of minutes before you begin rinsing. Anything less than that and you’ll shortchange the cleaning process. Give it those five minutes to set in and get started lifting away dirt.

6. Rinse the Rug
Scrub the soap out of this rug using a garden hose or buckets of clean water. Be certain all the cleaning solution is completely removed from the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to do away with as much excess water from the rug because possible so it’ll dry quicker. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee in the direction of the rest.

8. Permit the Rug Dry
Lay the rug level and allow the top of the rug to dry completely. After that, turn it over to allow the base side dry. Fans can help speed up the procedure. Make sure the rug is totally dry before you return it to the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and squished. Revive them by conducting a vacuum within the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and may enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you’re able to finish the job when you like.

Check related blogs about Rug Cleaning:
10-Tips-to-Know-Before-Getting-a-Rug in Garden Grove
How-Can-I-Clean-My-Rug-At-Home in Garden Grove

Scroll to Top