How Are Rugs Cleaned in Downey

How Are Rugs Cleaned?

Can your area rugs use a clean? Learn how to clean a rug and you’re able to bring all of your floor coverings back to life whenever you prefer. After a time, vacuuming only isn’t sufficient to receive it truly clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Downey is a job you can easily take on yourself. There is no need to hire professional rug cleaners for your task–unless the rug is extremely fragile (for example, an antique rug, Persian rug, or oriental rug).

Note: There’s no need to clean rugs on a schedule. Alternatively, you should just clean the rugs when they are visibly dirty or have an odor. Read on to learn how to refresh those well-worn area rugs so that they look as good as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Rug shampoo (or mild dish soap)

Soft-bristle sponge or brush
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on both sides. You want to be certain every last piece of debris is gone. If you have pets, use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
If it comes to the actual cleaning alternative, you can use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (found on the bottle) for mixing.

As an alternative, you may also use mild dish soap mixed in a bucket with warm water. Don’t use hot water as it could shrink the rug or cause fading.

4. Do a Colour Test
Before you begin scrubbing, make sure that the cleaner doesn’t cause the colors to run. Test the solution on the corner of the rug to be certain it is colorfast. If the color doesn’t bleed, it’s safe to proceed to the next step.

5. Wash the Rug
Let the cleaner sit on the rug to get a five minutes before you begin rinsing. Anything less than that and you’ll shortchange the cleaning procedure.

6. Rinse the Rug
Be sure all of the cleaning solution is totally removed from the area rug and the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to get rid of as much excess water from the rug as possible so it’ll dry quicker. You can use a wet-dry vacuum if you have one, or use a squeegee in the direction of the nap.

8. Permit the Rug Dry
Lay the rug flat and permit the cover of the rug to dry thoroughly. Then, turn it over to let the bottom side dry. Fans can help hasten the process. Be certain that the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads may get compacted and squished. Revive them by conducting a vacuum over the now-dry rug, or brush them with a foul-smelling brush. Now you’re finished, and may enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you’re able to finish the job when you prefer.

Check related blogs about Rug Cleaning:
How Much Does It Cost To Dry Clean A Rug in Downey