How Are Rugs Cleaned?

Can your area rugs use a deep clean? Learn how to clean a rug and you’re able to bring all of your flooring coverings back to life whenever you prefer. Area rugs can bring a room together, but they also takes a beating, in the foot traffic to spills and pets. After a time, vacuuming just is not sufficient to receive it really clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Culver City is a project you can readily take on your own. There’s no need to hire professional rug cleaners to the task–unless the rug is extremely delicate (by way of instance, an antique rug, Persian rug, or oriental rug).

Note: There’s no need to clean rugs on a schedule. Alternatively, you should simply clean the rugs when they are visibly dirty or have an odor. Read on to find out how to refresh those well-worn area rugs so that they look as great as they did when you first unrolled them.

1.

Here’s what you’ll Have to Have on hand to complete a successful area Rug Cleaning in Culver City:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum about the rug on both sides. You should be certain every last bit of debris has been gone. For those who have pets, then use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning alternative, you may use a rug shampoo. Whatever shampoo you choose, follow its precise instructions (found on the bottle) for blending.

Alternatively, you may also use gentle dish soap mixed in a bucket with warm water. Don’t use hot water since it could shrink the rug or cause fading.

4. Do a Colour Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Examine the solution to the corner of the rug to make sure it is colorfast. If the color does not bleed, it is safe to proceed to the next step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug to get a five minutes before you start rinsing. Anything less than this and you’re going to shortchange the cleaning process. Give it those five minutes to set in and start lifting dirt away.

6. Rinse the Rug
Scrub the soap out of the rug using a garden hose or buckets of clean water. Make certain all of the cleaning solution is completely taken out of the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
At this point, you’ll want to do away with as much excess water in the rug because possible so it will dry faster.

8. Permit the Rug Dry
Lay the rug flat and allow the cover of the rug to dry thoroughly. After that, turn it over to let the base side dry. Fans can help hasten the process. Be certain that the rug is totally dry before you return it to the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers may get compacted and squished. Revive them by conducting a vacuum over the now-dry rug, or brush them with a foul-smelling brush. Now you’re finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you can complete the job whenever you prefer.

Check related blogs about Rug Cleaning:
How Much Does It Cost To Dry Clean A Rug in Culver City