How Are Rugs Cleaned in Cloverdale - Green Carpet's Cleaning

Can your area rugs use a clean? Learn how to clean a rug yourself and you can bring all your floor coverings back to life whenever you like. After a while, vacuuming only isn’t enough to get it really clean–and that is when knowing the way to do it yourself comes in super handy.

Area Rug Cleaning in Cloverdale is a job you can easily take on yourself.

Note: There’s no requirement to clean rugs on a schedule. Alternatively, you should simply clean the rugs when they are visibly dirty or have an odor. Keep reading to find out how to refresh those well-worn area rugs so they look as great as they did when you first unrolled them.

Here’s exactly what you’ll Have to Have on hand to complete a successful area Rug Cleaning in Cloverdale:

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum about the rug on either side. You should be certain every last bit of debris is gone. If you have pets, use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific directions (located on the jar ) for blending.

Alternatively, you may even use gentle dish detergent mixed in a bucket with warm water. Do not use hot water since it could shrink the rug or cause fading.

4. Do a Color Test
Before you start scrubbing, be sure the cleaner does not cause the colors to run. Examine the alternative to the corner of the rug to be certain it is colorfast. If the color does not bleed, it’s safe to move on to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug to get a couple of minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning process.

6. Rinse the Rug
Be certain all of the cleaning solution is completely removed from the area rug and the runoff water is crystal clear.

7. Remove Extra Water
Now, you are going to want to get rid of as much excess water in the rug because possible so it will dry quicker. You can use a wet-dry vacuum if you have one, or use a squeegee in the direction of the rest.

8. Permit the Rug Dry
Lay the rug level and allow the top of the rug to dry thoroughly. Then, flip it over to allow the base side dry. Fans may help speed up the procedure. Make sure the rug is fully dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads can get compacted and squished. Revive them by conducting a vacuum within the now-dry rug, or brush with a foul-smelling brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You know how to clean an area rug yourself, and you’re able to complete the job when you like.