How Are Rugs Cleaned in Claremont


How Are Rugs Cleaned?

Can your area rugs utilize a deep clean? Discover how to clean a rug yourself and you can bring all your flooring coverings back to life whenever you like. After a while, vacuuming only isn’t enough to receive it really clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Claremont is a job you can readily take on yourself. There is no need to employ professional rug cleaners for the task–unless your rug is extremely delicate (for example, an antique rug, Persian rug, or oriental rug).

Notice: There’s no requirement to clean rugs on a schedule. Read on to learn how to Combine those well-worn area rugs so that they look as good as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Here is what you will need to have on hand to complete a successful area Rug Cleaning in Claremont:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum about the rug on both sides. You should be certain every last piece of debris is gone.

3. Mix Your Cleaner
If it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you opt for follow its precise instructions (found on the bottle) for mixing.

4. Do a Color Test
Before you start scrubbing, make sure that the cleaner does not cause the colors to run. Examine the solution to the corner of the rug to make sure it’s colorfast. If the color doesn’t bleed, it’s safe to move on to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a couple of minutes before you start rinsing. Anything less than this and you’re going to shortchange the cleaning process.

6. Rinse the Rug
Make sure all the cleaning solution is totally removed from the area rug and the runoff water is crystal clear.

7. Remove Extra Water
At this point, you are going to want to do away with as much excess water from the rug as you can so it’ll dry faster. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee in the direction of the nap.

8. Let the Rug Dry
Lay the rug flat and allow the cover of the rug to dry thoroughly. After that, flip it over to allow the base side dry. Fans may help hasten the procedure. Make sure the rug is totally dry before you return into the room.

9.
During the cleaning process, fibers and threads may get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush with a soft-bristled brush. Now you’re finished, and can enjoy your newly cleaned carpet. You understand how to clean an area rug yourself, and you can finish the job whenever you like.

Check related blogs about Rug Cleaning:
How to Clean Wool Area Rugs in Claremont