How Are Rugs Cleaned in Anaheim - Green Carpet's Cleaning

How Are Rugs Cleaned?

Can your area rugs utilize a clean? Discover how to clean a rug yourself and you can bring all your floor coverings back to life when you like. After a while, vacuuming only is not sufficient to get it really clean–and that is when knowing the way to do it yourself comes in super handy.

Area Rug Cleaning in Anaheim is a project you can easily take on your own.

Note: There’s no requirement to clean rugs on a program. Keep reading to find out how to refresh those well-worn area rugs so that they look as great as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Eliminate Dirt and Debris
Thoroughly vacuum about the rug on either side. You should make sure every last bit of debris is gone.

3. Mix Your Cleaner
If it comes to the real cleaning solution, you can use a rug shampoo. Whatever shampoo you opt for follow its precise directions (located on the jar ) for mixing.

Alternatively, you may also use mild dish detergent mixed in a bucket with warm water.

4. Do a Color Test
Before you begin scrubbing, be sure the cleaner does not cause the colors to run. Test the alternative to the corner of the rug to make sure it’s colorfast. If the color does not bleed, it’s safe to move on to another step.

5. Wash the Rug
Allow the cleaner sit on the rug to get a couple of minutes before you start rinsing. Anything less than that and you’re going to shortchange the cleaning process. Give it those five minutes to install and start lifting dirt away.

6. Rinse the Rug
Be sure all of the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
Now, you are going to want to do away with as much surplus water in the rug as you can so it’ll dry quicker.

8. Let the Rug Dry
The next-to-last measure to clean an area rug is just letting it dry. Lay the rug level and allow the cover of the rug to dry completely. Then, turn it over to let the base side dry. Fans can help hasten the process. Be certain that the rug is totally dry before you return into the room.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and compacted. Revive them by running a vacuum over the now-dry rug, or brush with a foul-smelling brush. Now you are finished, and can enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you’re able to complete the job whenever you like.