Area rugs are a excellent way to add warmth and character to your decoration, but after prolonged use, they will need a fantastic cleaning to look like new. For many modern rugs, cleaning may be a once-a-year DIY project that saves you the expense of professional cleaning. If your rug is tagged with specific cleaning instructions, follow these.
In general, area rugs only have to be deep cleaned annually. Here are a few ways to Find out if it is time for Rug Cleaning in San Pedro:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a couple of basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Prior to cleaning a rug, read the care instructions on the rug’s label. Try to select a time to clean your rugs if there will be three or four glowing, hot days together. It may be easier to clean your rugs outside, and sun and warm atmosphere will help them dry faster and thoroughly. Plus, the sunlight is a natural and effective deodorizer, which will keep the majority of the dirt and dust from the home. Whether an outdoor area isn’t available, use any floor area which moisture won’t damage (like vinyl or concrete flooring in the kitchen or kitchen.)
Shake or beat: Require smaller rugs and medium-sized rugs outside and provide them a fantastic shake to discharge loose dust and dirt. If the rug is large, ask a spouse for assistance to hang the rug above a porch rail or above a couple solid chairs. Don’t forget to shake the rug mat also.
Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it should be tested for colorfastness to avoid harm. Dab the cleaning solution on a small corner of the rug with a white towel. Let the test spot dry completely, then check again to make sure colors have not bled or faded.
Start at one end of the rug. Dip the sponge/brush to the cleaning solution. Don’t over-wet the fibers–only use as much as required. Work in a 3- from 3-foot location. Rinse the sponge/brush regularly so the dirt will not be transferred.
Scrub the rug thoroughly: It is important not to leave any soap substance on the rug. Dip a clean sponge at the rinse water and then remove any soap in the region just cleaned.
Blot: Push out as much excess water as you can using a squeegee and moving from the path of the rug nap. Scrub, rinse and blot an area before moving into the next.
Dry: Hang up the rug to dry, or put the rug level, face-up and prop the bottom with risers to permit for air circulation. Allow the rug dry thoroughly prior to bringing it back indoors, rotating it periodically to promote even drying. Once inside, turn on fans to promote greater air flow and assist the rug dry completely.
Adjust rug fibers: Once the rug has dried thoroughly, lightly go over the rug with a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is extremely soiled, it may be well worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the company’s instructions about the best way to operate the machine.
Check related blogs about Rug Cleaning:
How to Clean a Rug in San Pedro
